Dimensional Measurement - Page 695

Manufacturer: DeFelsko Brand: DeFelsko

The PosiTector 6000 FNRS1 Coating Thickness Gauge Standard Model with Right Angle Probe for Ferrous and Non-ferrous Metal Substrates (0-60 mils/1500 um), complete kit is a simple and durable precision instrument that uses magnetic and eddy current principles to accurately measure coating thickness on both ferrous and non-ferrous metals. All Positector 6000 Coating Thickness Gauges are supplied complete with precision plastic shims, protective rubber holster with belt clip, 3 AAA batteries, instructions, wrist strap (built-in style only), nylon carrying case with shoulder strap, NIST Traceable Certificate of Calibration, two (2) year warranty.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 139-181

The Mitutoyo 139 series tubular vernier inside micrometer includes a set of extension pipes with anvils for a diversified range of measurement measuring inside dimensions (ID) of cylinders, rings, and parallel surfaces. It has a vernier scale in inch units for taking precise ID measurements to 0.001”, and a satin chrome rust- and glare-resistant finish. The micrometer head has a travel of 1” per revolution that helps provide quick positioning. The hollow, tubular extension pipes help provide light weight with rigidity. A locking clamp helps hold measurements in place. The micrometer and accessories come with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 337-304

The Mitutoyo 337 series Digimatic tubular LCD inside micrometer includes a set of solid extension rods to help provide durability when measuring inside dimensions of cylinders, rings, and parallel surfaces. It has a single-value LCD readout that displays in inch and metric units with resolution to 0.00005” (0.001mm), and Statistical Process Control (SPC) data output to transmit results to a computer or external device. The output jack transmits SPC results to a computer through an interface cable (sold separately).The micrometer’s electronic microprocessor can hold measurements at any position, convert to absolute value, set a temporary zero position, and return to a true zero reading. The electronics housing has an Ingress Protection 65 (IP65) rating, which means that components are resistant to penetration by dust and debris, and resistant to penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet. The measuring faces are carbide-tipped for wear resistance. The micrometer includes, and is powered by, a single SR44 silver oxide battery, and comes with a wooden case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquart...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 192-631-10

The Mitutoyo 192-631-10 LCD Digimatic height gauge displays in inches or metric units within a range of 0” - 18"/0 - 450 mm, has an LCD digital readout with selectable resolution of 0.0005”/0.01mm or 0.0002”/0.005mm, with + or - 0.002”/0.05 mm of accuracy, and data output to transmit results to a Mitutoyo miniprocessor or computer for statistical process control (SPC). This height gauge has an electronic microprocessor providing the ability to preset up to two reference heights at any position, hold data at any position, as well as set a temporary zero position and return to a true zero reading. The output port transmits results to a Mitutoyo miniprocessor or computer through an interface cable (not included) for statistical process control (SPC). The scriber, used to mark a position on a workpiece, is 32 mm x 80 mm (H x L), carbide-tipped for hardness and to help prolong life, and is held to the gauge by a screw clamp for fastening ease. A dual-column beam provides stability that helps promote accurate measurements. A hand-operated feed wheel raises and lowers the gauge on the beam for ease of measurement, and is selectable for coarse or fine travel. The grip-base helps hold the unit in position by hand. The height gauge weighs 16.54 lbs/7.5 kg. The unit comes with an SR44 battery. Height gauges, also called gages, are precision measuring instruments that travel on a vertical column (also called the beam) to measure and/or mark the vertical distance from the base of an object in fine units. The vertical position of the gauge and its attached pointer are changed by turning a calibrated screw, or one or more feed wheels. Recorded rotations are read from a scale, a dial, counters, and/or an electronic display. A screw clamp holds the pointer to the gauge. The pointer is typically sharpened to act as a scriber, and can be used to mark position on a workpiece by scratching its surface. On compatible units, the scriber may be replaced by an electronic touch-signal probe. Height gauges are typ...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 468-971

The Mitutoyo 468-971 Holtest three-point internal micrometer has a measurement range of 6 to 12 mm, is titanium nitride (TiN)-coated, precise to 0.001 mm, and accurate to + or - 2 micrometers. TiN-coated measuring contact points offer increased durability and impact resistance over uncoated points, and contact point geometry allows the instrument to measure to the bottom of a blind hole. The ratchet stop offers constant force for repeatability. The micrometer has functions for presetting, zero/ABS (Absolute), auto power on/off, data hold, data output, error alarm, and a battery replacement alarm. Estimated battery life is eight months, under normal use. This gage set includes three interchangeable measuring heads, two setting rings, extension rod, and fitted wooden case. Includes inspection certificate ensuring that the exact micrometer purchased has met National Institute of Standards and Technology master standards. Bore gages measure holes, or bores, in a workpiece. They can measure the interior diameter of a hole at any depth, while internal micrometers can only measure to the depth of their teeth. Bore gages are typically calibrated with a setting ring. Bore gages come in two types, one simple, and the other direct-measuring. Simple bore gages are used with a caliper to transfer the hole measurement, while the more complex gages take the measurement directly, and display the measurement through a vernier, dial, or digital display. Bore gages have a two- or three-point contact, which indicates how many points on the gage head touch the inside of the bore. Two-point contacts are better at measuring ovality, while three-point systems are used to measure lobing, or triangular form error. Pistol-grip bore gages are used for fast, single-handed operation with good repeatability from one operator to another. Bore gages, regardless of type, can be used in some special applications, such as measuring threads, spline pitch diameters, and deep bores. Mitutoyo manufactures precision measuring tools, metrology equipme...

Manufacturer: Mitutoyo Brand: Mitutoyo

12 inch digimatic height gauge; Series 192. Double column structure ensures high measuring accuracy. Displays LCD heights .394", six digits and a minus sign (-). Carbide tipped scriber.

Manufacturer: Sonline Brand: Sonline

R1-6.5mm Pocket Measure Tool 32 Leaves Radius Gauge Gage.Radius gauges require a bright light behind the object to be measured.The gauge is placed against the edge to be checked and any light leakage between the blade and edge indicates a mismatch that requires correction;It is a kind of observational measurement because of its visual test way;R1-6.5mm includes 16pcs at each end, radius as 1mm, 1.25mm, 1.5mm, 1.75mm, 2mm, 2.25mm, 2.5mm, 2.75mm, 3mm, 3.5mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 6.5mm.

Manufacturer: HHIP Brand: HHIP Model: 4103-0048

Replace missing, damaged or worn-out Class ZZ gages from existing sets and libraries. ~ Each pin is individually marked with the size. ~ Fully hardened to 60-62 RC. ~ Finish to 10 Micron or better. ~ Overall length is 2". ~ Tolerance is - .0002".

Manufacturer: HHIP Brand: HHIP Model: 4103-0086

Replace missing, damaged or worn-out Class ZZ gages from existing sets and libraries. ~ Each pin is individually marked with the size. ~ Fully hardened to 60-62 RC. ~ Finish to 10 Micron or better. ~ Overall length is 2". ~ Tolerance is - .0002".

Manufacturer: HHIP Brand: HHIP Model: 4103-0124

Replace missing, damaged or worn-out Class ZZ gages from existing sets and libraries. ~ Each pin is individually marked with the size. ~ Fully hardened to 60-62 RC. ~ Finish to 10 Micron or better. ~ Overall length is 2". ~ Tolerance is - .0002".