Dimensional Measurement - Page 87

Manufacturer: Jerry Gray Brand: Jermamma

Two hole flange pins. 1/2 inch I.D. X 1-5/8 O.D.. Strong 6061 aluminum construction. Slag balls easily removed.

Manufacturer: SRA Measurement Brand: Machine DRO Model: ME-HZ300

The slotted mounting brackets that clamp to each end of the scale can easily be removed allowing the scale to be cut to any length. Also supplied is a bracket for the rear of the reading head, attached by two M3 screws which are supplied. Using the inch/mm button on the reading head also included is a zero button and on/off button. Included With The Scale - Mounting brackets for the scale beam, Reading Head mounting bracket, Manual, Battery.

Manufacturer: GENERAL TOOLS Brand: UltraTech Model: 6" ULTRATECH Color: Silver

Description: • 6" Carbon Fiber Caliper. • Lightweight, non-marring construction. • Tri-Mode digital display - inches, millimeters, and fractions. • For making inside, outside, depth and step measurements. • Range 0-6" (0-150mm) • Resolution 0.0005" (0.01mm or 1/64"). • Accuracy 0.001" (+/- 0.02mm). • Auto off feature preserves battery life. • Bar scale is graduated in inches and millimeters. • Free-wheeling friction roller advances and retracts slide. • Extendable depth gage for use in slots and small holes. • Replacement Battery - LR44 SPECIFICATIONS: · Range: 0-6" - 0-150mm · Resolution: 0.0005" - 0.01mm · Accuracy: +/- 0.001" - 0.02mm

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 504-2046S-01 Color: Yellow

Mitutoyo Dial Indicator, Graduation: 0.01mm, Range: 10mm, Dial face: 0-100, Back: Lug, Series: 2, Jeweled: No, Stem: 3/8"

Manufacturer: Starrett Brand: Starrett Model: 83A-6

The Starrett 83A-6 “Yankee” spring-type divider caliper opens to 6” (150 mm) with sturdy construction and smooth action. It is made of flat stock, high-grade steel, for easily reproducible and accurate transfer of measurements, scribing lines, arcs, and circles, and marking distances between two points. This caliper has flat, straight legs and comes with a solid nut. Bow spring is flexible yet strong, for reliability. The centrally located adjustment rod ensures smooth action when opening and closing the caliper. The hardened fulcrum stud is strong to help prevent give or play in the measurement, which would reduce accuracy. Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, machining, manufacturing, carpentry, and medicine. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw, and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the main scale to obtain the result. The dial caliper is used also for measuring size differential between two objects. The digital caliper takes the same sort of differential measurements as the dial caliper by zeroing the display at any point along the slide, with an LCD (replacing the dial) that displays a single, easily read value in both English and metric units. S...

Manufacturer: SRA Measurement Brand: Machine DRO Model: ME-DI-MIC-0-25-LD

Easy to read in workshop conditions. Thimble and sleeve feature clear metric graduations. Output Data Port for connecting to external devices via data cable. Please note data cable is not supplied. Included With The Micrometer - Storage case, adjustment tool, battery and instructions. Range - 0-25mm (0-1 inch). Resolution- 0.001mm (0.00004 inch). Accuracy - 0.003mm (0.00004 inch). Working Temp - 0 - 40C.

Manufacturer: Quint Measuring Systems Brand: Quint Measuring Systems Model: PKG10

The Crown Molding & Trim Kit with a set of Crown Molding Templates provides everything needed to install crown molding or trim. The charts and tables found in the book, Crown Molding & Trim: Install It Like A PRO! contain over 10,000 miter and blade tilt settings. The book (132 pages, 350+ color photos, and hundreds of examples) will explain how to easily cut and install your crown molding and trim. The Crown Molding Templates will allow you to easily determine how to place your crown molding on your saw and in which direction to set your saw to make the perfect cut each and every time. Made in the USA.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

The Brown & Sharpe ball-shaped, carbide contact point has an M1.4x0.3 thread size, and is designed for use with Bestest series dial test indicators. Carbide contact points are resistant to wear and magnetic fields.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Standard dial indicators measure the displacement along the axis of the indicator. Dial test indicators are very similar to dial indicators, except that the axis of measurement is perpendicular to the axis of the indicator. Dial and dial test indicators can be analog, with a mechanical dial, or electronic, with a digital display. Some electronic models transfer the data electronically to a computer for recording and potential manipulation.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001 and is headquartered in North Kingstown, RI.

Manufacturer: CST/Berger Brand: CST Model: 66-911

Permits stepping off angles of 90 deg & 180 deg with a center lens which permits foresight viewing Slot in handle accommodates plumb bob cord Features a larger field of view, and larger foresight viewing glass Complete with leather belt loop case Measures 33/4" (95mm) top to bottom

Manufacturer: TTC Brand: TTC

Use on milling and EDM machines. Locates edge of workpiece or jig. Provides a simplified method for centering workpiece or fixtures on horizontal or vertical machines, external or internal diameters - also with NC, EDM and other hard to turn spindles. Used on conductive as well as non-conductive workpieces. Accurately locates center of holes or shafts of any diameter, even grooved. Measures all 3 axes on milling machines. Can measure flatness. Face of indicator remains stationary in any desired position while machine spindle rotates, allowing the operator to accurately position machine table.