|
|
-
4.1 of 5.0 with 21 Reviews
SALE PRICE: $102.96
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-585-200-0
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-585-200-0
The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.
-
4.1 of 5.0 with 21 Reviews
SALE PRICE: $102.96
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-585-200-0
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-585-200-0
The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.
-
4.1 of 5.0 with 31 Reviews
SALE PRICE: $104.71 24% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 2320S-10
Color: White
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 2320S-10
Color: White
The dial indicators are Mitutoyo’s most popular, and have the widest application. Standard 0.01mm graduation dial gauges having an outer frame with an outside diameter of 57mm. All types come with limit pins and an outer frame clamp as standard. The outer clamp and lifting lever (optional) can be attached to either the right or left side. These parts can be easily installed and removed without tools. Secured adhesion between the outer frame and crystal as well as the use of an O-ring ensure countermeasures against water and oil permeation via the front face.
-
4.1 of 5.0 with 24 Reviews
SALE PRICE: $108.20 1% OFF
Manufacturer: INSIZE
Brand: INSIZE
Model: 4121-3B1
Manufacturer: INSIZE
Brand: INSIZE
Model: 4121-3B1
American standard thread ring gage, go, 3/4-10unc.
-
4.1 of 5.0 with 19 Reviews
SALE PRICE: $108.50 1% OFF
Manufacturer: INSIZE
Brand: INSIZE
Model: 7302-SPC3A
Manufacturer: INSIZE
Brand: INSIZE
Model: 7302-SPC3A
Data output cable, for electronic indicator and electronic protractor.
-
4.1 of 5.0 with 11 Reviews
SALE PRICE: $108.99 1% OFF
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-226-641-0
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-226-641-0
|
Fowler 52-226 series EZ-Read digit micrometers have a 0 to 1" measuring range and a pointed anvil/spindle pair with a choice of 15-degree or 60-degree point for measuring small flutes, recesses, grooved wires, keyways and other hard-to-reach areas. The digit display has 0.0001" graduation intervals and an accuracy of 0.00016" for precise readings. The positive locking nut on the spindle locks measurements in place for accurate readings. The anvil/spindle pair have hardened, precision ground, and micro-lapped high-grade steel measuring faces to provide accuracy, wear resistance, and long life. A friction thimble provides smooth and quiet operation, and is suitable for one-handed operation. Friction-style thimbles stop turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. SpecificationsDisplay type Digit Anvil/spindle style 15-degree or 60-degree Measuring range 0 to 1" Graduation interval 0.0001" Accuracy 0.00016" Thimble style FrictionMicrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The Fred V. Fowler Company manufactures inspection and measurement instruments such as electronic indicators, calipers, bore gages, and digital scales. The company, founded in 1946, is headquartered in Newton, MA.
-
4.1 of 5.0 with 49 Reviews
SALE PRICE: $108.99 16% OFF
Manufacturer: DFRobot
Brand: DFRobot
Manufacturer: DFRobot
Brand: DFRobot
The SRF08 is an evolutionary step up from the SRF04. It requires less power to operate, has a longer range (up to 6m) and it performs its own internal timing of the return echo. The SRF08 is also fitted with an LDR to measure light levels. Communication with the SRF08 is via the I2C bus that is available on many popular microcontroller's. Voltage - 5v only required Current - 15mA Typical. 3mA Standby. Frequency - 40KHz Range - 3cm -6m. Max Analogue Gain - Variable 94 to 1025 in 32 steps. Connection - Standard I2C Bus. Light Sensor - Front Facing light sensor.
-
4.1 of 5.0 with 5 Reviews
SALE PRICE: $109.00 1% OFF
Manufacturer: COLE-PARMER
Brand: Fowler
Manufacturer: COLE-PARMER
Brand: Fowler
AGD indicator with calibration certificate features a black dial and solid brass housing with a carbide contact tip. Dial conforms to AGD group 2, 2 ¼" diameter. AGD indicator with adjustable base features an 85-lb. pull, fine adjustment base. Dial conforms to AGD group 2, 2 ¼" diameter. What's included:Model 97153-06 includes a certificate of calibration. Model 97153-08 includes a magnetic base. Dial indicators provide high accuracy for all measurement applications Conform to ISO Standard American Gauge Design (AGD) Group 2
-
4.1 of 5.0 with 40 Reviews
SALE PRICE: $110.00 1% OFF
Manufacturer: Vermont Gage
Brand: Vermont Gage
Manufacturer: Vermont Gage
Brand: Vermont Gage
Vermont Gage thread gages are made to precise class X tolerances and come standard with a Certificate of Accuracy. Thread members are made of steel. Go / No Go sets consist of Go and a No Go gages and handles.
-
4.1 of 5.0 with 22 Reviews
SALE PRICE: $111.53 50% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 530-335
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 530-335
|
The Mitutoyo 530 series vernier caliper has two sets of jaws for measurement in metric units of outside dimension (OD), inside dimension (ID), step, and depth (when depth bar is included), for applications where the highest accuracy is required, especially in scientific research and in industries where parts must fit exactly. The caliper has a dual vernier scale, with both the upper and lower scales measuring in metric units. A 14-degree vernier face angle improves visibility and helps prevent parallax error in measurement reading. The caliper’s two sets of jaws provide the capability to make OD and ID measurements, as well as step measurements, where the butt end of the fixed jaw measures one end of a work piece before its upper/lower or inner/outer steps are measured. When included, a depth measuring blade with rounded edges provides the ability to make depth measurements. The scales are raised to slide easily and protect the graduation markings. A thumbwheel permits fast and easy measuring. A clamping screw on the upper scale rotates to control scale movement and locks to hold the sliding jaw’s position. The caliper is made of hardened, corrosion-resistant stainless steel with a satin chrome finish that helps reduce glare. The caliper meets Federal Accuracy Specifications GGG-C-111B. Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, and machining. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw, and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main ...
|
|