Dimensional Measurement - Page 945

Manufacturer: Mitutoyo America Corporation Brand: Mitutoyo Model: 209-915

Mitutoyo Digital Caliper Gage 209-915, External Tube Thickness Measurement Type, 0-1.57In, .001 In, 116mm Depth.

Manufacturer: Hantek MSO7082BLG Brand: Hantek MSO7082BLG Model: Hantek MSO7082BLG

Specifications: 1.Horizontal •Model:MSO7082BLG •Bandwidth:80MHz •Channel:2 •Sampling Rate Range:2GSa/s •Memory Depth(Sample Points):32K •SEC/DIV Range:4ns/div-40s/div 2.Vertical •A/D Converter:8-bit resolution,each channel sampled simultaneously •VOLTS/DIV Range:2mV/div-5V/div at input BNC •Position Range: ±400mV(2mV/div-20mV/div);±2V(50mV/div-200mV/div) ±40V(500mV/div-2V/div);±50V(5V/div) •Optional Analog Bandwidth LImit(typical):20MHz •Low Frequency Response(-3db):≤10Hz at output BNC •Rise Time:≤4.4ns •Vertical Gain Accracy: ±3% for sample or average acquistion mode,5V/div to 10mV/div ±4% for sample or average acquistion mode,5mV/div to 2mV/div 3. Trigger •Trigger Type:Video,Edge,Pluse Width,Slope,Overtime, Code-type,Duration,Queue,Repeat,Alternate •Trigger Sensitivity(Edge Trigger Type): •Trigger Level Range: CH1,CH2:±8 divisions from center of screen;EXT:±1.2V;EXT/5:±6V 4. Input •Input Coupling:DC,AC or GND •Input Impedance,DC coupled:1MΩ±2% for 20pF±3pF •Probe Attenuation:1X,10X •Supported Probe Attenuation Factor:1X,10X,100X,1000X 4. Logic Analyer •Sampled Channels:8 •Max.Input Impedance:200K(C=10p) •Input Voltage Range:0-3V •Logic Threshold Range:0-3V •Max.Sample Rate:1GSa/s •Sample Depth:32K 5. Arbitrary Waveform Generator •Waveform Frequency:DC-25MHz •DAC clock:2K-200MHz adjustable •Frequency Resolution:0.1% •Waveform Depth:4KSa •Vertical Resolution:12bit •Frequency Stability:＜30ppm

Manufacturer: COLE-PARMER Brand: DeFelsko

These simple, durable, accurate gauges use magnetic and eddy current principles to measure coating thickness on both ferrous and non-ferrous metals, quickly and accurately. Select standard or advanced models based on your application requirements. All models include built-in temperature compensation along with a Hi-RES mode providing enhanced display resolution for applications requiring greater precision. All stored measurements are date and time stamped and the statistics mode continually displays and updates average, standard deviation, min/max thickness, and number of readings while measuring. The one-handed menu navigation makes set up and operation simple, and the flip display enables right-side-up viewing. Gauges offer multiple calibration adjustment options that include one-point, two-point, known thickness, and average zero along with four user-selectable display language settings (English, Spanish, German, and French) for additional flexibility. Use the USB connection with your PC or Mac web browser or file explorers to connect to PosiTector.net for the free web-based application software and updates. Advanced models include all features noted above in addition to expanded storage capability of 100,000 readings (in up to 1000 batches and sub-batches), data transfer via USB to a PC or via Bluetooth wireless technology to a PC or printer, onscreen help, real time graphing, picture prompting and batch notes, and a hi contrast reversible color LCD. Additional features include scan mode, multiple stored calibration adjustments, SSPC PA2 function to determine if film thickness over a large area conforms to user-specified min/max levels, and PSPC 90/10 function to determine if a coating system complies with an IMO performance standard for protective coatings. Gauges conform to: ISO 2178/2360/2808, PrEN ISO 19840, ASTM B499/D1186/D1400/D7091/E376/G12, BS3900-C5, SSPC-PA2, and more What's Included: precision plastic shims, protective rubber holster with be

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 209-606 Color: White

The Mitutoyo 209 series external measurement caliper gauge has a dial display and large measuring depth for taking outer dimension (OD) comparison measurements in metric units of thickness of grooves or tubes, and other hard-to-reach external dimensions.. Depending on the model, these units come with pairings of ball contact points suitable for measuring external wall thickness of tubes, and/or chisel contact points suitable for measuring flat surfaces. The calipers’ jaws are spring loaded, which provide the point contacts with constant measuring pressure. The calipers have an Ingress Protection 65 (IP65) rating, which means that components are resistant to penetration by dust and debris, and resistant to penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet. Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, and machining. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw, and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the main scale to obtain the result. The digital caliper takes a differential by zeroing the display at any point along the slide, with an LCD that displays a single value in English and/or metric units. Mitutoyo manufactur...

Manufacturer: Flexbar Machine Corporation Brand: Flexbar Model: 15945

Flexbar Ultrasonic Thickness Gage Quickly and accurately Measures the through Thickness of materials that have good sound transmission and Parallel cross sections such as metals, aluminum, Plastics, ceramics and glass. Ideal for Checking Castings, wall Thicknesses of pipes and pressure vessels to determine surface erosion. Main Features include: Very Compact; Fully calibratable; Range: 0-225mm (steel); Sound velocity: 1000-9999m/s; Stores 5 velocities and 10 Measurements; Uses 2 AA batteries; Probe and Cable included. Carrying Case included. Specifications: Automatic Zeroing, Coupling condition indication, Probe error correction: Microporcessor controlled, Automatic shut off, Measurement Range: 0.04-8 in (1.2-200mm) (Steel), Display period: 0.5 seconds, Minimum pipe Cylinder and Tube Diameter: 0.8 in x 0.1 in (20mm x 3mm), Tolerance: µ (1%H+0.1)mm, Operating current:

Manufacturer: Fowler Brand: Fowler

Fowler Case For 54-110-340 54-110-440-0

Manufacturer: Westward Brand: Westward

Height Gage, Electronic Digital, Range 0-18 In/0-450mm, Resolution 0.0005 In/0.01mm, Accuracy +/-0.002 In, Display LCD, Features Zero Set, Preset, Hold/Data, Inch/Millimeter, Data Output, Construction Steel, Base Cast Iron, Screw Clamp Lever Locks Scriber at Any Position, Mechanism Feed Wheel, Battery CR2032, Includes Carbide Tip Scriber

Manufacturer: CME Tools Brand: CME Tools

This super indexing spacer combines the advantages of simole index with those of a worm-geared index. The operating handle to rotary table worm gear reduction ratio s 1:90. The handle is graduated in one minute and readings down to ten seconds can be set on the vernier.

Manufacturer: Starrett Brand: Starrett Model: 688-4Z

Starrett Countersink Gauges are offered in three different angles so that the gauge sets on the angular side of the countersink, as opposed to a chamfer gauge which sets on the top edge of the chamfer. This gauge directly reads the large diameter of the countersink in 0.002" or 0.05 mm increments. A set master ring is furnished with each gauge for calibration and setting. Press the button on top of the indicator to firmly depress the gauge head into the countersink. When the gauge is removed, the indicator reading is held in place until the reset button is activated.

Manufacturer: Brown & Sharpe Brand: Brown & Sharpe