|
|
-
4.0 of 5.0 with 36 Reviews
SALE PRICE: $110.00
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
|
The Brown & Sharpe TESA interchangeable thread inserts for TESA AC series micrometers are an accessory for use with the Brown & Sharpe TESA Micromaster AC or Isomaster AC micrometer. The V-anvil and conical spindle tip pair have a 60-degree flank angle and are sized in inch units for measuring the pitch diameter of screw threads conforming to the Unified Inch Standard, including UN, UNC, and UNF series. The thread inserts are made of hardened steel for durability.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot. Micrometer heads are for mounting in fixtures, where they are typically used for measurement, or as stops or feeds.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001, and is headquartered in North Kingstown, RI.
-
4.0 of 5.0 with 43 Reviews
SALE PRICE: $111.00 1% OFF
Manufacturer: Vermont Gage
Brand: Vermont Gage
Manufacturer: Vermont Gage
Brand: Vermont Gage
Vermont Gage's thread gages inspect the pitch diameter and the functional thread for both internal and external threaded products. All thread gages are marked with nominal size, class of fit and pitch diameters.
-
4.0 of 5.0 with 1 Reviews
SALE PRICE: $111.35 1% OFF
Manufacturer: YPG Gages
Brand: YPG Gages
Model: C4
Manufacturer: YPG Gages
Brand: YPG Gages
Model: C4
|
Sound, structurally stable, design and specifications, coupled with a highly experienced, solid manufacturing and quality management system, guarantees YPG Adjustable Limit Snap gages supplied into the USA market are of the highest quality. Gages can be 'Set, Sealed and Certified' to pre-determined Go/No Go sizes in YPG's accredited calibration laboratory. A fully stabilized cast iron frame forms the base of the 'C' type adjustable limit snap gage. A one piece, rectangular anvil and two adjustable square anvils all manufactured from hardened, lapped, tool steel, form the base of the measuring gage. The large anvil gauging surfaces of the type 'C' ensures a long life and a consistently high level of measuring capability and repeatability. Additionally, having only two adjustable anvils, the Go/No Go setting procedure is quick and straightforward. The Quality Management System operated by YPG is ISO 9001-2000 registered. This certification encompasses the entire organization and confirms the company's management system meets the required standard and in particular confirms the desire to exceed customer expectations and to be continually improving the products and services offered. All gages set at YPG are done in the company's state of the art, A2LA certified metrology laboratory. Product certification can be supplied on any gage calibrated or set in the laboratory. Adjustable Limit Snap Gages are precision gauging devices generally used in a production environment for the rapid, accurate and foolproof inspection of component parts during and after a production. There are certain basic rules which need to be followed to ensure adjustable limit snap gages perform to their expected accuracy and have a long operational life. 1-1/4" - 1-1/2" inch range and 32 - 38mm metric range.
-
4.0 of 5.0 with 43 Reviews
SALE PRICE: $111.93 1% OFF
Manufacturer: HHIP
Brand: HHIP
Model: 4400-0061
Manufacturer: HHIP
Brand: HHIP
Model: 4400-0061
0.24-0.4" Dial Bore Gage ~ .0005" Graduation ~ 2" probe depth. ~ 9 anvils included. ~ for close tolerance measurements of holes, taper and roundness. ~ Gages are supplied with an AGD Group II dial indicator. ~ Easy setting with micrometers or ring gages. ~ Self centering. ~ Fitted case with anvils index.
-
4.0 of 5.0 with 33 Reviews
SALE PRICE: $112.00
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 1410SB-10
Color: White
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 1410SB-10
Color: White
|
The Mitutoyo dial indicator has a black or white face, a choice of flat or lug, a 0.375" stem diameter, and inch measurements. The indicator has a 0.375" diameter stem, a #4-48 UNF contact point thread mount, and is used to measure surface variations in fractional inches. The choice of black or white dial and a contrasting hand help make measurements easy to read. The dial indicator comes with a choice of flat or lug back for a variety of mounting options. Flat back dial indicators are either clamp-mounted on the stem or plate-mounted on the rear of the indicator. Lug back dial indicators have a protrusion with a hole to mount the indicator using a lug or nut and bolt. Lug back dial test indicators usually come with the lug installed horizontally. The back on most indicators can be rotated to the vertical position. It has a stem design that provides a long clamping range, no through screw-holes on the frame for dust- and water resistance, and an involute curved lifting lever that provides smooth movement of spindle and dovetail joint for a tool-less connection. This dial indicator meets ANSI standards, Japanese Industrial Standard (JIS) B7503-1997, and American Gage Design (AGD) standards for face and thread size, and bezel and stem diameter. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, waterproof, dustproof, shockproof, a white or black face, and reverse reading for depth or bore gage measurement.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear ...
-
4.0 of 5.0 with 45 Reviews
SALE PRICE: $112.00 1% OFF
Manufacturer: Flexbar
Brand: Flexbar
Manufacturer: Flexbar
Brand: Flexbar
Flexbar Snap Gage. Model CS Type: C (2 Round buttons and Anvil) Frame No. 9 Range: 4 3/16 - 4 9/16
-
4.0 of 5.0 with 1 Reviews
SALE PRICE: $112.12 1% OFF
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-470-000-0
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-470-000-0
The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.
-
4.0 of 5.0 with 1 Reviews
SALE PRICE: $112.50 20% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 293-832-30
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 293-832-30
Includes a Mitutoyo Certificate of Calibration that these tools have been calibrated and meet the ISO/IEC 17025 International Standard for testing and calibration laboratories. Ingress Protection certified IP65 for protection against dust and water.
-
4.0 of 5.0 with 12 Reviews
SALE PRICE: $112.50 1% OFF
Manufacturer: Vermont Gage
Brand: Vermont Gage
Manufacturer: Vermont Gage
Brand: Vermont Gage
Vermont Gage's thread gages inspect the pitch diameter and the functional thread for both internal and external threaded products. All thread gages are marked with nominal size, class of fit and pitch diameters.
-
4.0 of 5.0 with 20 Reviews
SALE PRICE: $113.93
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 148-342
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 148-342
|
The Mitutoyo 148 series fine spindle feeding micrometer head has a vernier scale in metric units for taking precise measurements and spindle travel of 0.1mm per revolution for fine adjustment. It is available with a plain stem for mounting in a fixture with a split-body clamp or setscrew, or a clamp-nut stem for quick mounting. The vernier scale is graduated to 0.01mm, and has a satin chrome rust- and glare-resistant finish. The spherical measuring face is lapped to help provide accuracy.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot. Micrometer heads are for mounting in fixtures, where they are typically used for measurement, or as stops or feeds.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.
Viewing Page 1034 of 1520
|
|