Dimensional Measurement - Page 1119

Manufacturer: ABS Import Tools, Inc. Brand: HHIP Model: 4101-1203

HHIP go-no-go thread ring gage with handle, Class 6G for mm most commonly used for general applications including bolts, nuts, screws and similar fasteners. Size: M3 x 0.5.

Manufacturer: IDEC Corporation Brand: Idec Model: LH1D-H2HQ4C10-RG

OverviewIDEC introduces a new line of Surface Mount Indicators, the LH series of LED Spider Lights. These slim andstylish LEDs are best for mounting on the surface of equipment or panels, maintaining excellent visibility from the front and the side!LH1D spider lights can be used in various applications that do not have space behind the panel. These include robotic arms, product picking, door monitoring and other applications where customers can use dual-color pre-wired LED spider lights rather than drilling two 22 mm holes to mount two pilot lights.Offered in seven bright colors, these 24V AC/DC Spider Lights maintain an impressive 50,000 hour lifespan while consuming low levels of energy.FeaturesDirect Screw Mounting on Panel Surfaces, Aluminum Frames and WallsSlim Design Well Suited for Installation in Small Spaces1 m Wiring Cable Standard. 3 m and 5 m Cables Available24 VAC/DC and IP67 (IEC60529) RatedExcellent Visibility from the Front and SideLegends and Symbols Can Be Printed on Marking Film for Flat TypeRed/Green Two-Color Alternate Illumination AvailableUL Listed, CE Marked, TUV Rated

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe Color: White

The Brown & Sharpe Bestest-3 series dial test indicator set has a white face and inch measurements. The indicator can make either horizontal or vertical measurements, and the choice of white or yellow face dial face rotates. The white dial and a contrasting black hand help make measurements easy to read. The yellow face with contrasting black hand complies with ANSI standards for metric dial faces. The carbide, ball-contact tip reaches into the workpiece for accurate measurements of turned, milled, and ground parts, and for tool setting gauges, fixtures, and inspections. The continuous clockwise pointer rotation helps prevent plus or minus confusion and displays reading in fractional inches. The ball-bearing lever system swivels through to 180 degrees. The dial face mounted at the top of the indicator parallel to the axis, and three universal dovetail mounts can be used for mounting from the top, front, or back. Dovetail mounts provide a rigid setup. This indicator has a Monoblock body design with pinions mounted in jeweled bearings in an isolated assembly separate from the outer body, for high accuracy. It is anti-magnetic for safety when used around magnetic workpieces and debris, and has full-metal construction for durability and corrosion resistance. This dial test indicator meets Deutsches Institut fur Normung (DIN) 2270, and Norme Francaise (French Institute for Standardization) NF E 11-053 standards, and includes a Certificate of Accuracy and Traceability. The set includes a dial test indicator, a 0.080" (2mm) carbide contact point, a rectangular bar, a swivel clamp, a point wrench, a Certificate of Accuracy and Traceability, and a storage box.Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range th...

Manufacturer: Vermont Gage Brand: Vermont Gage

Vermont Gage's thread gages inspect the pitch diameter and the functional thread for both internal and external threaded products. All thread gages are marked with nominal size, class of fit and pitch diameters.

Manufacturer: Kimberly-Clark Professional Brand: Jackson Safety Model: 14796

Designed primarily for pipefitting applications, the Universal Level is a valuable tool for any craft required to use a level or a plumb bob. For structural ironworkers, the powerful holding magnets provide an extra hand. Electricians will find the Level useful in laying out and lining up heavy conduit. With the aid of a handy conversion chart, carpenters can use the Level for the layout of roof rafters. Multi-purpose tool features a 360-degree adjustable protractor dial bubble (DSL) that ensures accurate leveling and permits the following additional uses Setting a predetermined pitch of a string of pipe. Setting the angle of laterals to a precise degree. Trueing vertical runs. Two-holding flanges. Includes two cast-in 25-pound magnets (exerting a 50-pound pull) to securely hold the unit in place on any steel surface, including the underside of a pipe or beam. Permits hands-free leveling, a welcome aid in tight spots. Bubble is mounted on a protector dial, the Level may be used in any position and still read accurately. Magnets are cast in and do not interfere with the use of the Level on nonmagnetic materials, such as aluminum, copper, lumber, stone or other materials requiring leveling. For aligning pipe flanges (two-holding), the Level comes with a two-threaded, self aligning conical spacer and conical nut and bolt units. Designed to fit any size bolt hole spaced between 2-1/4" and 8" centers on flanges. Permits the orientation of flange bolt holds for any size pipe.

Manufacturer: INSIZE Brand: INSIZE Model: 7391-T1

BALL POINT, .039" dia, pair.

Manufacturer: INSIZE Brand: INSIZE Model: 7391-T5

BALL POINT, .118" dia, pair.

Manufacturer: Larson Electronics Brand: Larson Electronics Model: 0321OXARRX4

Acro 990 Dual Magnetic Base. Due to its cast aluminum head, the Acro 990 is a top heavy when set upright at the fully articulated angle. Due to the height and the articulation, the torque placed on the magnetic mounting plate with a single magnet can be problematic in high vibration environments or when mounted perpendicular to the ground. The dual magnetic base secures two 5 inch diameter, 200 pound grip magnets to a set of 2 brackets attached to the bottom of the Acro 990 battery base or the Acro 990 Vehicle Adapter. With 400 pounds of magnetic grip distributed over 12 inches of area, this offsets the weight and height and angle of the RL-10. The addition of the second magnet compounds the gripping power by spreading the grip over a larger area while distributing the base support. Designed originally for utility boom trucks and other heavy equipment and vehicle mount operations. Operators can attach the articulating light to the boom in order to take advantage of the articulating light head. The dual magnetic base mount attaches to the base of the battery or vehicle adapter via 4 screws which secure 2 brackets to the base. Caution: Be sure to remove the light by "scooping" the magnetic base bracket from beneath the battery. Do not pull on the light to remove the magnetic bases from the mounting surfaces.

Manufacturer: Starrett Brand: Starrett Model: T463XRL

The Starrett 463 series micrometer head has a vernier scale in inch units for taking precise measurements to 0.5”, and is available with a knurled ring-type lock nut to hold measurements in place. The micrometer is available with a plain stem for mounting in a fixture with a split-body clamp or setscrew, or a clamp-nut stem for quick mounting. The vernier scale is graduated to 0.001” or 0.001” depending on the model, and has a satin chrome rust- and glare-resistant finish. The spindle is made of hardened steel to help provide durability, with a flat measuring face suitable for measurement or use as a stop, and is micro-lapped to help provide accuracy.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot. Micrometer heads are for mounting in fixtures, where they are typically used for measurement, or as stops or feeds.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-236-005-1

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.