Dimensional Measurement - Page 1196

Manufacturer: COLE-PARMER Brand: Ohaus Model: 71135127

science-lab-weighing-dishes

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 2416S-10

The Mitutoyo 2416S-10 dial indicator is used to measure surface variations. It has a measurement range of 0 to 1.0", graduations of 0.001", an accuracy of + or - 0.002", and a range per revolution of 0.1". The dial is white with a contrasting hand for readability. The stem design provides a long clamping range, there are no through screw-holes on the frame for dust- and water-resistance, and it has a lug back for mounting from the rear of the indicator. This unit has a 3/8" diameter stem and a #4-48 UNF contact point thread mount. The dial has a jeweled bearing for accurate readings. This model is a continuous dial with a reading of 0-100, for direct readings. It has a force of 1.8 Newtons (N) or less.SpecificationsRange0 to 1.0"Graduations0.001"Accuracy+ or - 0.002" (overall)Range per revolution0.1"Measuring force1.8N or lessStem#4-48 UNF contact point thread mount with 3/8" diameter spindleFaceDial, white face, jeweled bearing, lug on backDial reading0-100Dimensions115.7 x 57 x 25.3mm (H x W x D), not including lugShipping weight0.57lb.H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Dial indicators are also called dial gauges, probe, and electronic indicators. These precision instruments measure small linear distances and object sizes. The dial magnifies the measurement so that it can be easily read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Standard dial indicators measure the displacement along the axis of the indicator. Dial test indicators are very similar to dial indicators, except that the axis of measurement is perpendicular to the axis of the indicator. Dial and dial test indicators can be analog, with a mechanical dial, or electronic, with a digital disp...

Manufacturer: ABS Import Tools, Inc. Brand: HHIP Model: 4101-1225

HHIP go-no-go thread ring gage with handle, Class 6G for mm most commonly used for general applications including bolts, nuts, screws and similar fasteners. Size: M2.5 x 0.45.

Manufacturer: TrippNT Brand: TrippNT Model: 50601 Color: Clear

TrippNT's Clear Acrylic Leveling Table has a built in bubble level to see when platform is perfectly level. The tripod legs are easy to adjust and works well for leveling liquids or gels. 16 x 2 x 8 inches (width height depth); 2 pounds.

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: EE20-1006

2-6'' x 0.0001'' Dial Bore Gauge Set, Brand New, #EE20-1006 Includes extension holder and fitted case Chrome plated handle Insulated grip Self-centering Easily adjustable Range: 2-6'' X 0.0001'', Stem Length: 6'' The accuracy is + / - 0.0003"

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 700-113-10

The Mitutoyo 700 series digital caliper is one of Mitutoyo’s My Cal Lite Digimatic DIY (Do-It-Yourself) digital calipers. It offers the advantages of digital calipers at an economical price. It is made of steel to shield its components. It gives an absolute reading from zero rather than the last at-rest position, and uses Mitutoyo’s linear encoder technology, which allows users to “set and forget” the origin and make comparative measurements. The digital caliper has a four-digit LCD display, to help ensure readability. Function control buttons are accessible from the caliper face, and include Inch/Metric to convert from inch to metric measurements, Origin to set and retain the original measuring point, On/Zero to turn on the caliper and zero-set the LCD display, and Off to turn off the caliper. The caliper tracks the origin point you set—even after shutoff. Once on again, the caliper can immediately start measuring, without zero resetting or concern of overspeed errors. The LCD can be "zeroed out" before making and comparing incremental measurements without having to subtract the first measurement from the second. An alarm alerts the user to low voltage, scale contamination, overspeed, and counting value composition errors. The digital caliper has an ABSOLUTE electrostatic capacitance linear encoder to help reduce overspeed errors and a depth measuring bar. Its jaws and rule are sized for personal use. LCD resolution is 0.001” (0.1mm). A rolling thumb wheel makes fine adjustments and a thumb screw locks the scale’s position. Response speed is up to 70.8 inches/1,800 mm per second. The caliper includes, and is powered by, a single SR44 silver oxide cell battery that lasts for approximately 2 years with continual normal use. Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, and machini...

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: 2025-4201

Base: 4" No. of rods: 6

Manufacturer: Pin Gages Brand: Pin Gages

Each gage is marked with size and tolerance ( + or -). Photo shows one of our pin gage sets, but not necessarily this specific set.

Manufacturer: SCT Brand: SCT Model: WFG

Wet Film Gauges are used for measuring wet film thickness of paints, enamels, lacquers, adhesives and many other wet coatings that are sprayed, dipped or brushed on a smooth surface. Meets ASTM D 4414 "Standard Practice for Measurement of Wet Film Thickness of Organic Coatings by Notched Gauges". Measurements: microns and mils. Gauge range in microns: 25-2000 Micron Scale. Gauge range in mils: 1-80 Mil Scale. Accuracy = 0.2 mils. Standard used is traceable to NIST - All Aluminum. Size: 2.25" x 3.25" x 0.034". Made in the USA.

Manufacturer: iGaging Brand: iGaging

iGaging ABSOLUTE Technology IndicatorThe iGaging digital electronic indicator with ABSOLUTE encoder always remembers and traces absolute origin zero or preset data. It provides unlimited measuring speed without losing its origin. This indicator will indicate absolute position when turned on.Features:SPC/USB Data PortABSOLUTE encoder technology - Unlimited measuring speed.IP54 ProtectionRead and convert Inch/mm displayOrigin setPreset valueShank diameter: 3/8"Carbide tip4-48 threaded tipFloating lug back2 Years warrantySpecifications:Range: 0.5"/25mmResolution: 0.00005"/0.001mmAccuracy: 0.00016"