Dimensional Measurement - Page 489

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 103-182

The Mitutoyo 103 series outside micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, and a ratchet-stop mechanism for uniform pressure during adjustment. The micrometer’s frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.001”, with a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: DeFelsko Brand: DeFelsko

The PTB P1 Coating Thickness Gauges Polystyrene Test Block Kit is ideal for verifying the accuracy and operation of coating thickness gages and are an important component in fulfilling both ISO and in-house quality control requirements. Many organizations require verification of gage accuracy at the test site each time a coating thickness gage is put into service and at frequent intervals during use. Ideal for this purpose, DeFelsko certified coating thickness standards have measured values traceable to a National Metrology Institution.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 513-444E Color: Yellow

The Mitutoyo 513 series dial test indicator has a tilted face, an 8mm stem diameter, and metric measurements. The indicator has a reversible measuring direction and an adjustable contact point, and is used to measure surface variations in narrow or recessed areas. The face inclines 20 degrees from the axis of the indicator and three dovetail mounts, and can be mounted either horizontally or vertically from the front, top, or back of the indicator. It has a unified outer frame that prevents oil and water from permeating the front face, a hard frame body that provides rigidity and durability, and a clear, flat, and scratch-resistant crystal face. This dial indicator meets Japanese Industrial Standard (JIS) B7533-1990. The basic set includes a dial indicator, a 2mm carbide contact point, an 8mm diameter stem, a knurled clamp ring, and a plastic storage box.Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, and a yellow face that meets ANSI standards for metric indicators.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Standard dial indicators measure the displacement along the axis of the indicato...

Manufacturer: Starrett Brand: Starrett Model: 796XFL-1

The Starrett 795M/796M series LCD outside micrometer has a digital single-value LCD readout that displays in inch and metric units with resolution to 0.00005” (0.001mm) for outside diameter (OD) measurement, and a vernier scale in inch units for taking precise measurements. The micrometer has an Ingress Protection 67 (IP67) rating, which means that components are resistant to debris and to submersion in liquid under standard conditions for up to 30 minutes.The micrometer’s electronic microprocessor can preset, hold, or limit measurement at any position, as well as set a temporary zero position and return to a true zero reading. An automatic off function helps preserve battery life when the unit is not in use. Depending on the model, it may have Statistical Process Control (SPC) data output to transmit results to a computer or external device through an interface cable (sold separately).The micrometer’s frame has a black wrinkle finish that helps resist rust and reduce glare. A friction thimble mechanism helps provide uniform pressure for precise, repeatable measurement. The vernier scale on the thimble and sleeve has a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat, micro-lapped measuring face for accuracy and are carbide-tipped for wear resistance. A knurled ring-type lock nut helps provide secure locking of the measurement position. The micrometer includes, and is powered by, a single CR2032 lithium cell battery. Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to ...

Manufacturer: Starrett Brand: Starrett Model: 796XFL-1

The Starrett 795M/796M series LCD outside micrometer has a digital single-value LCD readout that displays in inch and metric units with resolution to 0.00005” (0.001mm) for outside diameter (OD) measurement, and a vernier scale in inch units for taking precise measurements. The micrometer has an Ingress Protection 67 (IP67) rating, which means that components are resistant to debris and to submersion in liquid under standard conditions for up to 30 minutes.The micrometer’s electronic microprocessor can preset, hold, or limit measurement at any position, as well as set a temporary zero position and return to a true zero reading. An automatic off function helps preserve battery life when the unit is not in use. Depending on the model, it may have Statistical Process Control (SPC) data output to transmit results to a computer or external device through an interface cable (sold separately).The micrometer’s frame has a black wrinkle finish that helps resist rust and reduce glare. A friction thimble mechanism helps provide uniform pressure for precise, repeatable measurement. The vernier scale on the thimble and sleeve has a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat, micro-lapped measuring face for accuracy and are carbide-tipped for wear resistance. A knurled ring-type lock nut helps provide secure locking of the measurement position. The micrometer includes, and is powered by, a single CR2032 lithium cell battery. Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to ...

Manufacturer: Starrett Brand: Starrett Model: 380-36

These straight edges are precision ground and nicely finished to rigid Starrett standards. They are unexcelled for drawing or scribing straight lines and checking surfaces for straightness. Their thickness and design permit them to retain shape and accuracy, but still be portable and easy to handle. Model380-36Thickness7/32Length36Width2-13/32BevelNoGraduationsNo

Manufacturer: ZFE Brand: ZFE

ZFE 1pc Metric Plug Thread Gage Gauge Size M48X2mm Product Name : Thread Plug Gage Class : 6H Thread Diameter: M48 Thread Pitch : 2mm Material : Steel Color : Black, Silver Tone Package Content : 1 x Thread Plug Gage

Manufacturer: INSIZE Brand: INSIZE Model: 1154-150

Electronic Height gage, 0-6"/0-150mm.

Manufacturer: Starrett Brand: Starrett Model: 261ML

It is also useful in gaging jobs where scratches on the work surface cannot be tolerated or where there is risk of distortion when spindle meets work as in measuring soft or elastic materials. With speeder and lock nut.

Manufacturer: Westward Brand: Westward

Outside Micrometer, Electronic Digital, Range 0-1/0-25 In./mm, Resolutions 0.00005/0.001 In./mm, Ratchet Thimble, Flat Anvil, Flat Spindle, SPC Output, LCD Display, Lock Nut Type Lever, IP54 Water Resistant, Push Button Controls, Preset Capability, Inch/Metric Conversion, Vernier Scale On Thimble., Includes Battery, Key Spanner, Fitted Carrying Case