Dimensional Measurement - Page 490

Manufacturer: Westward Brand: Westward

Dial Depth Gage, Range 0 to 22 In, Base Length 4 In, Number of Rods 6, Rod Dia 0.177 In, Graduations 0.001 In, Hardened Tool Steel, Precision Ground and Microlapped, Finish Satin Chrome, Meets/Exceeds Federal Specifications For Accuracy, Includes 2 Extra Points and Shop Hardened Case

Manufacturer: Starrett Precision Measurement Brand: Starrett Model: 649-1

The Starrett 649 Series Spindle Square offers accuracy, convenience and significant time saving with the common shop task of tramming the head of a vertical milling machine. This must be done regularly to ensure squarness and perpendicularity between the spindle and work surface. The spindle square is easier to use and more precise than the traditional method of tramming with a dial test indicator.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-223-005-1

Fowler 52-223 series metric digit micrometer has a choice of measuring range and a flat anvil/spindle pair with a 6.5mm diameter measuring face for general purpose measuring. The digit display has 0.01mm graduation intervals and an accuracy of 0.001mm for precise readings. Micrometers up to 100mm have a secondary Vernier scale with 0.001mm graduation intervals and an accuracy of 0.001mm and microfine graduations on a satin chrome finish to provide clear reading. The positive locking nut on the spindle locks measurements in place for accurate readings. A zero adjustment on the sleeve ensures accurate measurements. The anvil/spindle pair have hardened, precision-ground, and micro-lapped measuring faces with 0.00076mm flatness and 0.001mm parallelism on 0 to 25mm micrometers to provide accurate measurements. The spindle thread is hardened, ground, and lapped to provide smooth movement, accuracy, and long life. The ratchet-stop thimble provides an audible sound and stops turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. The blue baked-enamel frame provides durability. The insulated steel frame helps reduce temperature-related expansion or contraction providing for accurate measurements. The micrometer includes a wrench and fitted case. Micrometers 50mm and above include a standard. SpecificationsDisplay type Digit with Vernier Anvil/spindle style Flat Measuring range Varies Digit graduation interval 0.01mm Vernier graduation interval 0.001mm (on 0 to 100mm micrometers) Accuracy 0.001mm Thimble style Ratchet stop Anvil/spindle diameter 6.5mm Flatness 0.00076mm Parallelism 0.001mm on 0 to 25mm micrometersMicrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types ...

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-223-005-1

Fowler 52-223 series metric digit micrometer has a choice of measuring range and a flat anvil/spindle pair with a 6.5mm diameter measuring face for general purpose measuring. The digit display has 0.01mm graduation intervals and an accuracy of 0.001mm for precise readings. Micrometers up to 100mm have a secondary Vernier scale with 0.001mm graduation intervals and an accuracy of 0.001mm and microfine graduations on a satin chrome finish to provide clear reading. The positive locking nut on the spindle locks measurements in place for accurate readings. A zero adjustment on the sleeve ensures accurate measurements. The anvil/spindle pair have hardened, precision-ground, and micro-lapped measuring faces with 0.00076mm flatness and 0.001mm parallelism on 0 to 25mm micrometers to provide accurate measurements. The spindle thread is hardened, ground, and lapped to provide smooth movement, accuracy, and long life. The ratchet-stop thimble provides an audible sound and stops turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. The blue baked-enamel frame provides durability. The insulated steel frame helps reduce temperature-related expansion or contraction providing for accurate measurements. The micrometer includes a wrench and fitted case. Micrometers 50mm and above include a standard. SpecificationsDisplay type Digit with Vernier Anvil/spindle style Flat Measuring range Varies Digit graduation interval 0.01mm Vernier graduation interval 0.001mm (on 0 to 100mm micrometers) Accuracy 0.001mm Thimble style Ratchet stop Anvil/spindle diameter 6.5mm Flatness 0.00076mm Parallelism 0.001mm on 0 to 25mm micrometersMicrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types ...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 513-443T-06 Color: Black

The Mitutoyo 513 series dial test indicator has a tilted face, a 0.375" stem diameter, and inch measurements. The indicator has a reversible measuring direction and an adjustable contact point, and is used to measure surface variations in narrow or recessed areas. The face inclines 20 degrees from the axis of the indicator and three dovetail mounts, and can be mounted either horizontally or vertically from the front, top, or back of the indicator. It has a unified outer frame that prevents oil and water from permeating the front face, a hard frame body that provides rigidity and durability, and a clear, flat, and scratch-resistant crystal face. This dial indicator meets Japanese Industrial Standard (JIS) B7533-1990. The full set includes a dial indicator, three contact points (0.039", 0.079", and 0.118" diameter), a 4mm diameter stem, two stems (0.157" and 3/8" diameter), a knurled clamp ring, a swivel clamp, a 4 inch holding bar, and a plastic storage box.Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, and a white or black face.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Standard dial i...

Manufacturer: Vermont Gage Brand: Vermont Gage

Vermont Gage's thread gages inspect the pitch diameter and the functional thread for both internal and external threaded products. All thread gages are marked with nominal size, class of fit and pitch diameters.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe Color: White

Lever-type dial test indicators are especially intended for use on the shop floor or in the inspection room - Ideally suited for comparative measurements on a surface plate, for instance - Determine form, shape and position deviations as well as axial and runout errors. Monobloc housing with 3 countersunk dovetail attachments. Well-proven dial test indicators with dial face mounted parallel to the insert's axis. Tesa design swiss made. Standard: DIN 2270 NF E 11-053. Rotating dial. Movement with patented shock proof system. Lever system with friction drive to prevent overload. Supplied in a plastic case along with: 1 Insert with a 2mm diameter, 1 Wrench and 1 Mounting rod with a 8mm diameter. Identification number. Declaration of conformity. 38mm Dial diameter. 12.53mm Insert.

Manufacturer: Vermont Gage Brand: Vermont Gage

Vermont Gage's thread gages inspect the pitch diameter and the functional thread for both internal and external threaded products. All thread gages are marked with nominal size, class of fit and pitch diameters.

Manufacturer: Western Instruments Brand: Western Instruments

The Western Instruments N88-2-M Metric Basic Pit Gauge, Centre Mount 2.5" (64mm) Blade, Complete Kit is a precision instrument that allows the Corrosion Inspector to conveniently measure Pit Depth or material loss in areas of Weight-Loss Corrosion. Western Instruments Pit Gauges assure compliance with Corrosion Alliances for equipments wherever corrosion affects materials such as Pipeline, Vessels, Piping, Storage Tanks, Oil Country Tubular Goods, Drill Pipe, Bottom Hole Assemblies, Bridges and Structures, Shipping, Concrete, and Aircraft Components.

Manufacturer: Fowler Brand: Fowler

Fowler Internal Anvils for Mini Horizontal for Ø10mm and Up. 53-190-020