Dimensional Measurement - Page 689

Manufacturer: INSIZE Brand: INSIZE Model: 3227-E043

Three points internal micrometer, 35- 425 inch graduation 0001 inch.

Manufacturer: Mitutoyo Brand: Mitutoyo

Technical Specification Item Electronic Digital Indicator Series 543 Resolution .00005/0.001mm Accuracy .00012 Range 0.500/12.7mm Features With SPC Data Output Includes Battery Compliance & Restrictions Compliance and Restrictions None This listing is for each. _DELETE_

Manufacturer: DeFelsko Brand: DeFelsko

The Spare Probe for PosiTector 6000 FS Coating Thickness Gauge ( Probe Only ) is a replacement probe for PosiTector 6000. This single probe is supplied with a NIST Traceable calibration certificate.

Manufacturer: PHASE II Brand: PHASE II

Comes with (2) substrate samples (steel, aluminum), (4) calibrated thickness samples, carry case, batteries and operation manual.Model #PTG-3500 Integrated probe that can automatically detect a ferrous or non-ferrous substrate.Mo

Manufacturer: VETUS INSTRUMENTS Brand: VETUS INSTRUMENTS

MCT200 Coating Thickness Gauge is designed for non-destructive, fast and precise coating thickness measurement and also can measure the film thickness. It is widely used in manufacturing,metal processing industry, chemical industry.commodities inspection and other testing areas. Measuring range from 0 to 10 mm, can meet the different industries in view of the workpiece surface coating thickness testing requirements. It is the necessary professional precision instrument to improve the production efficiency and the qualified rate, saving the cost of production. Technical Specifications *Measuring range: (0～1250) μm,depends on probes. F1 probe works on the magnetic induction principle and should be used for non-magnetic coatings such as aluminum, chrome, copper, zinc, paint and varnish, enamel, rubber etc., on an iron or steel substrate. Non-ferrous probe N1 probe works on the eddy-current principle and should be used for insulating coatings on all non-ferrous metals *Resolution Accuracy：±(3%H+1) μm; H is the thickness of the coating to be measured *Communication storage: Memory for up to 20 files (up to 50 values for each file) *Working time: 200 hours typical operating time (EL backlight off). *Main unit weight: 340g *Dimensions: 125mm×67mm×31 mm *Power supply: Two 5 alkaline battery（Battery not included in the package） Working Conditions *Working temperature: －20℃～＋50℃. *Storage temperature: -30℃～＋70℃ *Relative humidity: ≤90％. *The surrounding environment should avoid of vibration, strong magnetic field, corrosive medium and heavy dust. *Standard probe: Ferrous Probe F1/ Non-ferrous probe N1, you can choose just one of them ,the default probe is F1, please specify if you need N1 ) *Optional probe: Five types of probes (F400, F1, F10, N1, CN02) are available for different application. F10 probe measures up to 10mm.(please specify us if you need other probes)

Manufacturer: VETUS INSTRUMENTS Brand: VETUS INSTRUMENTS

DR370 coating thickness tester is an eddy current thickness meter, according to the national industry standard GB/T 4957-1985, using eddy current thickness measurement, nondestructive measurement of non magnetic metal (such as aluminum, copper, stainless steel) on non conductive coating thickness (such as paint, powder, plastic, rubber, enamel, enamel, electrophoresis, coating etc.), the use of the instrument is simple, easy to carry, large size, large LCD display backlight reading more clearly, the use of imported high-quality metal probe structure, precision solid, good repeatability, and good performance. Technical Specifications *Measurement range:0-1250μm *Use environment: temperature: 0℃-50℃, humidity: 20%RH-90%RH, no strong magnetic field environment *Thinnest matrix: 0.3mm *Measurement accuracy: ±(1%-3%)H+1.5μm *Resolution:0.1μm /1μm (less than 100μm is 0.1μm, more than 100μis 1μm) *Minimum base area 10*8mm *Minimum curvature: convex 5mm; concave 25mm *Dimensions: 130mm*70mm*24mm *Weight: 100g *Power supply: three (No. 7) alkaline battery（Battery not included in the package） *Manual / automatic shutdown function *Statistical maximum, minimum, average, the number of measurements, a key to complete, high quality, efficient, convenient and unlimited *Large capacity storage, can store more than and 800 measurement data, connect the computer to read the data and print permanent save *Two kinds of calibration methods can be used: zero calibration and two-point calibration. *The operation process is marked by a beep (single measurement method) *Automatic identification of ferrous and non ferrous substrates. *Convert to m/Mil *Low voltage indication *Standard packing:DR370 coating thickness gauge;4 * calibrated diaphragm (50,100,250,370μm);matrix;ABS instrument packing box;Instructions; Certificate; Cleaning cloth

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-280

Accuracy: Refer to the list of specifications. Length standard: ABSOLUTE electrostatic capacitance type linear encoder. Max. response speed: Unlimited. Data output (-NG/OK/NG signal, NPN open collector), Remote control (hold-preset, preset-recall, zero-set), Origin-set/Preset, Zeroset, GO/+/-NG judgment, Max/Min/ Runout value holding, Counting direction switching, Power ON/OFF, inch/mm conversion (on inch/metric models only). Alarm: Low voltage, Counting value composition error, Over-flow error, Tolerance limit setting error. Measuring force: 2.0N or less.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 368-912

The Mitutoyo 368-912 Holtest three-point micrometer set has TiN-coated points, a measurement range of 12-20 mm and is precise to 0.005 mm, with + or - 2 micrometers of accuracy. Titanium nitride (TiN)-coated measuring contact points offer durability and impact resistance, while the contact point geometry allows the instrument to measure to the bottom of a blind hole. The ratchet stop offers constant force for repeatability. Includes inspection certificate ensuring that the exact micrometer purchased has met National Institute of Standards and Technology master standards. This gage set includes two complete display units, setting ring, extension rod, and a fitted plastic case. Bore gages measure holes, or bores, in a workpiece. They can measure the interior diameter of a hole at any depth, while internal micrometers can only measure to the depth of their teeth. Bore gages are typically calibrated with a setting ring. Bore gages come in two types, one simple, and the other direct-measuring. Simple bore gages are used with a caliper to transfer the hole measurement, while the more complex gages take the measurement directly, and display the measurement through a vernier, dial, or digital display. Bore gages have a two- or three-point contact, which indicates how many points on the gage head touch the inside of the bore. Two-point contacts are better at measuring ovality, while three-point systems are used to measure lobing, or triangular form error. Pistol-grip bore gages are used for fast, single-handed operation with good repeatability from one operator to another. Bore gages, regardless of type, can be used in some special applications, such as measuring threads, spline pitch diameters, and deep bores. Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL. What’s in the Box? Mitutoyo 368 series 12-16 mm three-point internal micrometer Mitutoyo 368...

Manufacturer: Mitech Brand: Mitech Model: MT200

Features: 1.Capable of performing measurements on a wide range of material. 2. Four transducer models. 3. Probe-Zero function, Sound-Velocity-Calibration function. 4.Two-Point Calibration function. 5.Two work modes: Single point mode and Scan mode. 6. Coupling status indicator showing the coupling status. 7. Auto sleep and auto power off function to conserve battery life. 8. Optional software to process the memory data on the PC. 9. Optional thermal mini-printer to print the measured data via RS232 port. Specifications: 1. Display:128×64 dot matrix LCD with EL backlight. 2. Measuring Range:0.75-300mm (in Steel). 3. Sound Velocity Range: 1000~9999 m/s. 4.Resolution:0.1/0.01mm(selectable). 5. Accuracy: +-(0.5%Thickness+0.04)mm 6. Units: Metric/English unit selectable. 7. Four measurements readings per second for single point measurement, and ten per second for Scan Mode. 8. Memory for 20 files (up to 99 values for each file) of stored values. 9. Upper and lower limit can be pre-set. It will alarm automatically when the result value exceeding the limit. 10. Power Supply:Two "AA" size, 1.5 volt alkaline batteries. 100 hours typical operating time (EL backlight off). 11. Communication：RS232 serial port. 12. Case:Extruded aluminum body suitable for use under poor working conditions.

Manufacturer: INSIZE Brand: INSIZE Model: 2426-HOLDER2E

HOLDER for 2426.