Dimensional Measurement - Page 688

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 547-320S

Mitutoyo 547-320S IDC Digimatic Thickness Gage, Flat Anvil, Deep Throat Type, 0 -0.4"/0-10mm Range, 0.0005"/0.01mm Resolution, +/-0.001" Accuracy

Manufacturer: MTI CORPORATION Brand: MTI

Includes: Digimatic micrometer (friction thimble type), Range: 0-1, LCD resolution: .00005"; Digimatic caliper, Range: 0-6", LCD resolution; .0005"; and a mahogany case. (646PKA077)

Manufacturer: INSIZE Brand: INSIZE Model: 6313-0D067

Setting ring, 067 inch.

Manufacturer: Dakota Ultrasonics Brand: Dakota Ultrasonics

The T-044-2700 Alpha-Hi Damped High Temperature Transducer, 1/2" Diameter, 5.00 MHz is a 5.00 MHz dual element transducer for TI-25M/DL/MMX. Alpha-Hi Damped High Temperature (650F / 343C), potted cable, top in

Manufacturer: Checkline Brand: Checkline

Materials used: steels, glass, thin plastics. Range in steel: 3/16" (.040" -6.0"), 1/4" (.040" - 6.0"), 1/2" (.050" - 19.99"). Wearface diamenter: 1/4", 3/8" or 5/8". Crystal diameter: 3/16", 1/4" or 1/2" 1/2" diameter, 5.0 MHz dual element transducer High Temperature (650°F / 343°C), potted cable, top in

Manufacturer: Flexbar Brand: Flexbar

Flexbar True-Bore 3-Point Bore Gaging System. Specifications For Ordering Handles, Gage Heads . True-Bore Is The Result Of Over 25 Years Of Design And Manufacture Of 3-Point Bore Gaging Systems. Ideal For Solving Internal Diameter Measurement Problems On The Shop Floor And Inspection Areas, The System Is Available In A Large Measuring Range For Specific Applications. Mechanical And Electronic Dial Gages As Well As Linear Probes Can Be Used As Specified. Main Features: True-Bore Heads Have A Large Measuring Range And Are Supplied With Fixed Anvils Eliminating Operator Error. 24 Heads Cover .236"-7.87" (6-200mm Range). Unique System Design Allows Two Measuring Handles Or New Pistol Grip Triga-BoreTM To Cover .236"-7.87" (6-200mm Range). Extensions Available For Increased Gaging Depths. Repeatability: .0001"/0,002mm. High Degree Of Accuracy Can Be Achieved Without Need For Special Skills. Customer Can Specify Type Of Output. Ideally Suited To Simple Or Integrated Measurement Applications. Can Be Used For Special Applications Such As Threads 'O' Ring Grooves, Spherical Forms, Etc. Ergonomically Designed Handle Offers Single Handed Operation. Accurate Calibration And Linearity Checks Can Also Be Made Using Flexbar's True-Cal System. Model No. 20322, 3-Point Bore Gage Heads, Head Size 2.362-2.756"

Manufacturer: WQY Brand: WQY

The shipment will be arranged in 1-5 working days(not including customized product), and takes about another 3-10 working days to reach you. 1.0" - 1.2" RANGE (25-30mm) SETTING RING ACCURACY WITHIN +/-0.00002". READING: 0.0002" SELF-CENTERING 3-POINT FOR ACCURATE MEASUREMENT OF INTERNAL DIAMETERS. HIGHLY DURABLE CARBIDE-TIPPED CONTACT POINT. MEASUREMENT CAN BE TAKEN CLOSER TO THE BOTTOM OF THE BLIND BORE., AND CAN BE TAKEN INTO A DEEP HOLE WITH AN EXTENSION. RATCHET STOP PROVIDES UNIFORM MEASURING PRESSURE AND ASSURES HIGHEST READING ACCURACY.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-576

The Mitutoyo 543-576 Absolute Digimatic electronic indicator gauge, ID-N body, is for measuring short, linear distances in harsh workshop conditions. It has a measurement range of 0 to 0.5" (0 to 12.7mm), a selectable resolution of either 0.00005" (0.001mm) or 0.0005" (0.01mm), and an accuracy of + or - 0.00012" (0.003mm). The LCD displays in both inches and metric units, and can be rotated 180 degrees for taking measurements from different directions. The body is 35mm wide and can be used in locations where space is restricted. An Absolute electrostatic capacitance linear encoder helps prevent overspeed errors for taking accurate measurements. This model is Ingress Protection certified IP66 for protection against dust and water jets.This unit has a 3/8" diameter stem and a #4-48 UNF contact point thread mount. Additional functions include zero set, preset, direction switching, tolerance judgment, hold, and alerts for low voltage, counting value composition error, overflow error, and tolerance limit setting error. This indicator gauge has a measuring force is 2.5 Newtons (N) or less. It has a battery life of approximately 7,000 hours of normal use. This unit comes with an SR-44 battery. This gauge offers serial data output (using optional SPC cables, sold separately), which increases speed and reliability of digital measurement records.SpecificationsRange0 to 0.5" (0 to 12.7mm)ResolutionSelectable: 0.00005" (0.001mm) or 0.0005" (0.01mm)Accuracy+ or - 0.00012" (0.003mm)Measuring force2.5N or lessStem4-48UNF contact point thread mount with 3/8" diameter spindleFaceLCD displays in both inches and metric units, face can be rotated 180 degreesData outputYesDimensions128.5 x 35 x 25mm (H x W x D)Shipping weight0.53lb.StandardsIP66Power sourceSR-44 battery (included)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Dial indicators are also called dial gauges, probe, and electronic indicators....

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 110-502

The Mitutoyo 110 series micrometer head has a differential screw movement and a vernier scale in metric units for taking precise, high-resolution measurements with a spindle travel of 0.05mm per revolution for extra-fine adjustment. It has a clamp-nut stem for quick mounting of the micrometer in a fixture. The vernier scale is graduated to 0.001mm, 0.005mm, or 0.0001mm depending on the model, and has a satin chrome rust- and glare-resistant finish. The spherical measuring face is lapped to help provide accuracy.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot. Micrometer heads are for mounting in fixtures, where they are typically used for measurement, or as stops or feeds.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: INSIZE Brand: INSIZE Model: 3227-E05

Three points internal micrometer, 425- 5 inch graduation 0001 inch.