Dimensional Measurement - Page 779

Manufacturer: Mahr Federal Inc. Brand: Mahr Federal Model: 22P-15

Portable measurement of sheet materials and small parts. Lift-lever for one-hand operation. Indicator is built into gage frame for maximum ruggedness.

Manufacturer: DeFelsko Corporation Brand: DeFelsko Model: PRBNRS-D

Defelsko 90 degree regular separate probe. Heavy-duty, gold-plated locking connector for industrial environments. Certificate of Calibration Long Form). Traceable to NIST included with every probe. Each probe retains its own unique calibration information allowing full probe interchangeability). For non-ferrous metals aluminum, copper, titanium, etc.). Right angle probe for measuring within areas of low headroom. These constant-pressure, stainless steel probes are hermetically sealed to be totally waterproof - ideal for underwater use. Accuracy: + 0.1 mils + 1 percent) greater than 2 mils.

Manufacturer: Starrett Brand: Starrett Model: 686-2Z

These gauges directly measure the diameter of chamfered holes. No setting master is necessary. When the three-blade plunger is pressed against a flat surface, the gauge should read the set number stamped on the back of the indicator. In case of wear, the gauge may be adjusted to read the proper number.

Manufacturer: Starrett Brand: Starrett

Steel Rule, Construction: Heavy Spring-Tempered Steel, Graduation Type: 4R, Graduations: 8ths, 16ths, Quick-Reading 32nds, 64ths, Length (In.): 48, Width (In.): 37257, Finish: Satin Chrome, Markings: Black

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 345-351-10

The Mitutoyo 345 series LCD inside micrometer has caliper-type jaws for making inside dimension (ID) measurements, and a digital single-value LCD readout that displays in inch and metric units with resolution to 0.00005” (0.001mm) It also has Statistical Process Control (SPC) data output to transmit results to a computer or external device. The output jack transmits SPC results to a computer through an interface cable (sold separately).The micrometer’s electronic microprocessor can hold measurements at any position, convert to absolute value, set a temporary zero position, and return to a true zero reading. It also has a function lock and two presets. The micrometer is made of high-grade tool steel for durability and has a satin chrome rust- and glare-resistant finish. The measuring faces are carbide-tipped for wear resistance. The micrometer includes, and is powered by, a single SR44 silver oxide battery, and comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Starrett Brand: Starrett Model: 689-1Z

Starrett Countersink Gauges are offered in three different angles so that the gauge sets on the angular side of the countersink, as opposed to a chamfer gauge which sets on the top edge of the chamfer. This gauge directly reads the large diameter of the countersink in 0.002" or 0.05 mm increments. A set master ring is furnished with each gauge for calibration and setting. Press the button on top of the indicator to firmly depress the gauge head into the countersink. When the gauge is removed, the indicator reading is held in place until the reset button is activated.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-342B

.5 In/12.7mm, .00005/.0001/.0005 In/0.001/.01mm, ID-C ABSOLUTE Digimatic Indicator, 3/8" stem, Flat Back, With SPC Data Output, Calculation Type.

Manufacturer: YUSHI INSTRUMENTS Brand: YUSHI INSTRUMENTS Model: UM-1D

YUSHI INSTRUMENTS：We Are Manufacturer 20 years NDT experience,ISO, CE & RoHS certificated, this is how we keep superior quality and competitive offers for global valued customers This instrument can be widely used in the fields such as manufacturing, metal processing, chemistry and business inspecting for measuring the thickness of all sorts of materials where ultrasonic wave can spread through with a constant speed and get the reflection from the back side Operating Principle:P-E (pulse-echo) or E-E (echo-echo) with dual-crystal probesMeasuring Range:0.03'' to 12'' in standard mode, 0.12'' to 0.79'' in coating modeStorage:5 arrays are divided to store 500 thickness valuesRepeatability:0.001''Display Resolution: 0.001inchUnits:Inch or MillimeterUpdate Rate:4HzMaterial Velocity Range:0.0394 to 0.3937in/μsMeasuring Limits of Tube(Steel):Φ20mm × 3.0mm (PT-08 probe)Φ15mm × 2.0mm (PT-06 probe)The measuring error is up to ± 0.001'' Measuring Error:Low limit to 0.4'': ±0.004''0.4'' to high limit: ± ± (1%H+0.001) inchNote: H is the actual thickness of the testing materialOperating Time:Up to 200 hours with alkaline batteries (without backlight)Instrument Shut-off:AUTO OFF after 5 minutes of inactivityPower Requirements:Two 1.5V AA alkaline batteries (Warning with low battery voltage)Operating Temperature:14°F to 122°F , 4°F in special requirementsSize:5.8'' X 2.9'' X 1.3''(H X W X D)Weight:7.4oz including batteries Battery and Couplant are Prohibited Goods by Air Shipping by DHL taking 3-5 daysWhat's in the BOX?1*Main Unit, 1*Probe, 1 * Carrying Case, 1* User Manual

Manufacturer: Starrett Brand: Starrett Model: 387-48

These straight edges are precision ground and nicely finished to rigid Starrett standards. They are unexcelled for drawing or scribing straight lines and checking surfaces for straightness. Their thickness and design permit them to retain shape and accuracy, but still be portable and easy to handle. The No. 387 Series has one edge that is both beveled and graduated in 32nds of an inch. If the straight edges are brought to the work and used on edge, they should be suspended at these two points to minimize deflection. Most jobs involve the use of straight edges in the flat position - and it is in this position that we check most stringently.

Manufacturer: Checkline Brand: Checkline

The MTT-10-500-T Dial Thickness Gauge for Textiles and Non-Wovens with 500 mm Jaw Depth is a digital dial thickness gauge designed for the accurate thickness measurement of non-woven fabrics, textiles, felts, geomaterials, paper, floor coverings, leather, foils, etc. It is offered with two different jaw depths providing clearance to measure wide samples. The combination of feeler diameter and load weight generate a specific "pressure" as required by many standardized test standard necessary in order to get reliable and repeatable measurements such as fabric, felt, textiles and similar compressible materials. The instrument does not meet the DIN, EN and ISO standards. The feeler shape and the pressure are corresponding to DIN EN ISO 5084 standards. This low-cost thickness gauge is suitable for quick comparison measurements.