Dimensional Measurement - Page 848

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-432-469-0

The Fowler 52-432-469-0 Machinist Hardened Steel Square 4 Piece Set is designed for schools, apprenticeships and training programs. The squareness of the blade edge to the working face of the stock is ± 0.0008" for 4" and 6" models, and ± 0.001" for 9" and 12" models. The length of hardened blade is measured from inner edge of beam to end of blades. Made of high carbon steel, these squares have true right angles both inside and outside. Beams and blades ground and lapped for straightness and parallelism. Beam grooved at inner corners for clearance of burrs and dirt. This product has a 1 year warranty offered by Fowler Precision. If you experience any problem contact Fowler directly for warranty claims. Fowler, an American company, manufactures inspection and measurement instruments such as electronic indicators, calipers, bore gages and digital scales. The company founded in 1946, is headquartered in Newton, MA.

Manufacturer: Q-Mark Manufacturing Inc. Brand: Q-Mark

M3 stylus, 5.0 mm diameter x 9.0 mm long titanium base, 2.0 mm diameter Therm-X graphite stem, 3.0 mm diameter silicon nitride ball. Overall stylus length is 50.0 mm. Stylus weight is 0.69 gram. Compare to Zeiss 626103-0301-050.

Manufacturer: L.S. Starrett Brand: Starrett

End Measuring Rod is used for checking and setting micrometers of 2 capacity and larger. Also use on machine tools for comparing gages, checking precision measuring tools, and measuring parallel surfaces. Insulated handles minimize expansion by heat when held in the hand. This listing is for each. Technical Specification Item End Measuring Rod w/Grip Dia. 11mm Range 525mm For Use With 550mm Micrometers, Includes Insulating Rubber Handle

Manufacturer: Starrett Brand: Starrett Model: 733SCM

GageMux Cable - Starrett 733 - Starrett SmartCableâ„¢ makes it fast and easy to connect a measuring tool to the Starrett 7612 and 7613 GageMux.

Manufacturer: Start International Brand: START International

PEAK full focus measuring loupes. High resolution achromatic color corrected lens, optional light source. Comes complete with measuring reticule, protective carrying case and lens cleaning cloth. Focusing from +2 to -2 Diopter with a smooth helicoid focus mechanism, 360 degree clear acrylic base, optional reticules with white markings. 0.1mm scale division. Measuring range: 8mm. Measures 35mm diameter by 23mm height.

Manufacturer: Starrett Brand: Starrett Model: 269MA

These are named "taper" Gauges only because of their shape. They do not measure taper, but they do measure hole and slot sizes.

Manufacturer: INSIZE Brand: INSIZE Model: 3241-3

Depth micrometer, 0-3", graduation 001 inch base 3.996×.669".

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-520-444-1 Color: White

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 513-454E Color: Yellow

The Mitutoyo 513 series dial test indicator has a yellow face, an 8mm stem diameter, and metric measurements. The indicator has a reversible measuring direction and an adjustable contact point, and is used to measure surface variations in narrow or recessed areas. The vertical face is perpendicular to the axis of the indicator and three dovetail mounts, and can be mounted either horizontally or vertically from the front, top, or back of the indicator. It has a unified outer frame that prevents oil and water from permeating the front face, a hard frame body that provides rigidity and durability, and a clear, flat, and scratch-resistant crystal face. This dial indicator meets Japanese Industrial Standard (JIS) B7533-1990. The basic set includes a dial indicator, a 2mm carbide contact point, an 8mm diameter stem, a knurled clamp ring, and a plastic storage box.Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, non-magnetic pointer and contact point for secure operation in magnetic environments, and a yellow face that meets ANSI standards for metric indicators.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Standard dial indicators measure the d...

Manufacturer: INSIZE Brand: INSIZE Model: 3221-2

Tubular inside micrometer, 1-2", graduation 001".