Dimensional Measurement - Page 97

Manufacturer: Vermont Gage Brand: Vermont Gage

Vermont Gage's thread gages inspect the pitch diameter and the functional thread for both internal and external threaded products. All thread gages are marked with nominal size, class of fit and pitch diameters.

Manufacturer: Vermont Gage Brand: Vermont Gage

Vermont Gage's thread gages inspect the pitch diameter and the functional thread for both internal and external threaded products. All thread gages are marked with nominal size, class of fit and pitch diameters.

Manufacturer: Vermont Gage Brand: Vermont Gage

Vermont Gage's thread gages inspect the pitch diameter and the functional thread for both internal and external threaded products. All thread gages are marked with nominal size, class of fit and pitch diameters.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 148-804

The Mitutoyo 148 series micrometer head has a small size and a vernier scale in metric units for taking precise measurements to 13mm. It is available with a plain stem for mounting in a fixture with a split-body clamp or setscrew, or a clamp-nut stem for quick mounting. The vernier scale is graduated to 0.01mm, and has a satin chrome rust- and glare-resistant finish. The measuring face is lapped to help provide accuracy.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot. Micrometer heads are for mounting in fixtures, where they are typically used for measurement, or as stops or feeds.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: MAYERS Brand: ieGeek

MULTI-FUNCTION  The Tacklife designed with versatible function, remarkable accuracy and fast measurement speed, laser intensity indication, you can measure 131ft and it supports single and continuous measuring, area measuring, volume measuring and you can also change the units selection of meter, inch and feet  USER-FRIENDLY DESIGN  The Tacklife adapt to innovative ergonomic structure design, pocket-sized for easy portability, high definition backlit display and a new upgrade optical lens, the use of high quality soft glue design, enclosed rubber soft keys feel comfortable and dureble.  PRECISION LASER MEASURING TECHNOLOGY  Ultilizing precision laser technology, the Tacklife laser distance measure kit provides fast, easy and accurate measurements every time you use it. Users are able to be more productive and more profitable with greater accuracy and precision on the job site.  Features:  Indirect measurement by Pythagorean Theorem  Continuous measurement  Min/Max distance tracking  Easy addition/subtraction of measurement  Easy targeting with bright laser pointer  Large LCD with backlight  Display illumination and multi-line display  99 data records  Auto correction and error report technology  Low battery indication  Auto / manual power off function  Packing Included:  1 * Laser Distance Measure 1 * Operation Instruction (English) 1 * Pouch Bag 1 * Holding Rope (battery is not included)

Manufacturer: Starrett Brand: Starrett

A popular precision external micrometer

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 530-118

The Mitutoyo 530 series vernier caliper has two sets of jaws and a depth bar for four-way measurement in inch and metric units of outside dimension (OD), inside dimension (ID), step, and depth, for applications where the highest accuracy is required, especially in scientific research and in industries where parts must fit exactly. The caliper has a dual vernier scale, with an upper scale measuring in inches and a lower scale measuring in millimeters. A 14-degree vernier face angle improves visibility and helps prevent parallax error in measurement reading. The caliper’s two sets of jaws provide the capability to make OD and ID measurements, as well as step measurements, where the butt end of the fixed jaw measures one end of a work piece before its upper/lower or inner/outer steps are measured. A depth measuring blade with rounded edges provides the ability to make depth measurements. The scales are raised to slide easily and protect the graduation markings. A thumbwheel permits fast and easy measuring. A clamping screw on the upper scale rotates to control scale movement and locks to hold the sliding jaw’s position. The caliper is made of hardened, corrosion-resistant stainless steel with a satin chrome finish that helps reduce glare. The caliper meets Federal Accuracy Specifications GGG-C-111B. Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, and machining. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw, and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel ...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 530-118

The Mitutoyo 530 series vernier caliper has two sets of jaws and a depth bar for four-way measurement in inch and metric units of outside dimension (OD), inside dimension (ID), step, and depth, for applications where the highest accuracy is required, especially in scientific research and in industries where parts must fit exactly. The caliper has a dual vernier scale, with an upper scale measuring in inches and a lower scale measuring in millimeters. A 14-degree vernier face angle improves visibility and helps prevent parallax error in measurement reading. The caliper’s two sets of jaws provide the capability to make OD and ID measurements, as well as step measurements, where the butt end of the fixed jaw measures one end of a work piece before its upper/lower or inner/outer steps are measured. A depth measuring blade with rounded edges provides the ability to make depth measurements. The scales are raised to slide easily and protect the graduation markings. A thumbwheel permits fast and easy measuring. A clamping screw on the upper scale rotates to control scale movement and locks to hold the sliding jaw’s position. The caliper is made of hardened, corrosion-resistant stainless steel with a satin chrome finish that helps reduce glare. The caliper meets Federal Accuracy Specifications GGG-C-111B. Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, and machining. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw, and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel ...

Manufacturer: INDICOL Brand: INDICOL

Ideal for Bridgeports .Suitable for all popular indicators with 5/32" shank or dovetail. Mounts with single pressure screw directly on machine quill, bypassing the working tool.

Manufacturer: AdirPro Brand: AdirPro Model: 720-05 Color: Orange

The AdirPro 720-04 Mini Prism System is a versatile prism system in a small packge. The all metal prism assembly is powder painted fluorescen orange with fluorescent yellow targets. and is fully compatible with leading manufacturers such as Trimble, Sokkia, Topcon, Leica, Nikon, Pentax, etc. The heavy-duty 25mm diameter copper-coated prism for fog prevention also features a tilting holder with friction axis, zero or -30 mm offset. It includes an S-hook and bracket for handheld work, a point for stake-outs. Can be mounted on a prism pole or tribrach at three heights: 70mm, 100mm or 115mm. The AdirPro survey prism comes with a 1 year warranty.