Dimensional Measurement - Page 160

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-392BCAL

The calibrated Mitutoyo 543-392BCAL Absolute Digimatic digital indicator gauge, ID-C series, is for measuring short, linear distances in mechanical engineering, machining, and manufacturing applications. It has a measurement range of 0 to 0.5" (0 to 12.7mm), a resolution of 0.00005" (0.001mm), and an accuracy of + or - 0.0001". The LCD screen displays measurements in inches and metric units. The indicator has a go/no-go display that lights green or red, respectively, when upper and/or lower tolerances have been set, and the result can be displayed in full-size characters. The face of the indicator can be rotated 330 degrees for reading from different directions. This unit has a 3/8" diameter stem and a #4-48 UNF contact point thread mount. It has a flat back for stem mounting or plate mounting on the rear of the indicator. This model is Ingress Protection certified IP42 for protection against objects greater than 1mm and dripping water. Mitutoyo calibrated tools include a Certificate of Calibration that provides evidence that the tool has been calibrated and is within allowable error specifications. Mitutoyo calibrated tools are certified by Mitutoyo's American Association for Laboratory Accreditation-accredited calibration laboratory (A2LA Certificate #750-01) to the International Organization for Standardization/International Electrotechnical Commission (ISO/IEC) 17025 International Standard for testing and calibration laboratories.Additional functions for this indicator include origin set, preset, zero set, counting direction switching, and alerts for low voltage, counting value composition, overflow, and tolerance limit setting errors. An Absolute electrostatic capacitance-type linear encoder helps prevent overspeed errors for taking accurate measurements. The measuring force is 1.5 Newtons (N) or less. It has a battery life of approximately 7,000 hours of normal use. This unit comes with a SR44 battery. This gauge offers serial data output (using optional SPC cables, sold separately), which increases speed a...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-472B

The Mitutoyo 543-472B Absolute Digimatic electronic indicator gauge, ID-C series, is for measuring short, linear distances in mechanical engineering, machining, and manufacturing applications. It has a measurement range of 0 to 1" (0 to 25.4mm), a resolution of 0.00005" (0.001mm), and an accuracy of + or - 0.0001". The LCD screen displays measurements in inches and metric units. The indicator has a go/no-go display that lights green or red, respectively, when upper and/or lower tolerances have been set, and the result can be displayed in full-size characters. The face of the indicator can be rotated 330 degrees for reading from different directions. This unit has a 3/8" diameter stem and a #4-48 UNF contact point thread mount. It has a flat back for stem/plate mounting. An Absolute electrostatic capacitance-type linear encoder helps prevent overspeed errors for taking accurate measurements. This model is Ingress Protection certified IP42 for protection against objects greater than 1mm and dripping water. Additional functions for this indicator include origin set, preset, zero set, counting direction switching, and alerts for low voltage, counting value composition, overflow, and tolerance limit setting errors. The measuring force is 1.8 Newtons (N) or less. It has a battery life of approximately 7,000 hours of normal use. This unit comes with a SR-44 battery and lifting lever. This gauge offers serial data output (using optional SPC cables, sold separately), which increases speed and reliability of digital measurement records.SpecificationsRange0 to 1" (0 to 25.4mm)Resolution0.00005" (0.001mm)Accuracy+ or - 0.0001" with quantizing error of 1 countMeasuring force1.8N or lessStem#4-48 UNF contact point thread mount with 3/8" diameter stemFaceBacklit LCD displays in both inches and metric units, green or red lighting displays go/no-go judgment, rotates 330 degrees, with flat backData outputYesDimensions168.5 x 59 x 42.5mm (H x W x D)Shipping weight0.7lb.StandardsIP42Power sourceSR-44 battery (included)H is height, t...

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

Magnetic measuring support with articulated arm, 390mm height. Magnetic base has 2 flat faces plus 1 prismatic one. The arm supports up to four pounds. Articulations made from duralumin. Disengageable permanent magnet. Dovetail clamp with a 8mm diameter clamping bore. Consisting of: articulated arm, clamp and magnetic base with fine adjust. ≈700 measuring force. V-Base for diameter 30 - 150mm. Magnetic base measures 60mm length by 50mm width by 55mm height. Mass: 1.45 kg or 1.85 kg.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

The Brown & Sharpe vernier inside rod micrometer includes a set of interchangeable rods for a diversified range of measurement of cylinders, rings, and parallel surfaces. It has a vernier scale in inch units graduated to 0.001” for taking precise inside dimension (ID) measurements. The micrometer is made of high-grade tool steel with a satin chrome rust- and glare-resistant finish. The set includes a spacing collar and a handle for secure positioning. The micrometer and accessories come with a wooden case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001, and is headquartered in North Kingstown, RI.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 350-351-10

The Mitutoyo 350 series Digimatic micrometer head has a single-value LCD readout that displays in inch and metric units with resolution to 0.00005” (0.001mm). It is available with a plain stem for mounting in a fixture with a split-body clamp or setscrew, or a clamp-nut stem for quick mounting.The micrometer’s electronic microprocessor can hold measurements at any position, convert to absolute value, set a temporary zero position, and return to a true zero reading. It also has a function lock and two presets. The micrometer has Statistical Process Control (SPC) data output to transmit results to a computer or external device. The output jack transmits SPC results to a computer through an interface cable (sold separately). The micrometer has a satin chrome rust-resistant finish. A spindle lock helps hold measurements in place. The micrometer includes, and is powered by, a single SR44 silver oxide battery.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot. Micrometer heads are for mounting in fixtures, where they are typically used for measurement, or as stops or feeds.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 323-350

The Mitutoyo 323-350 Digimatic digital disk micrometer is for measuring the root tangent length of spur gears and helical gears. The micrometer has a measurement range of 0 to 1.0" (0 to 25.4mm), resolution of 0.00005" (0.001mm), and an accuracy of + or - 0.0002". The LCD screen displays in inches and metric units. The measuring surfaces are disk-shaped, with a flat outer surface and a center recess, are 0.787" (20mm) in diameter, and have an edge thickness of 0.028" (0.7mm) for use in narrow spaces. This gauge has a ratchet stop to help provide uniform pressure for precise, repeatable measurements. It is Ingress Protection certified IP65 for protection against dust and water. Additional functions offered by this micrometer include origin setting, zero setting, data hold, data output, and alarms for low voltage and counting value composition errors. This micrometer offers serial data output (using optional SPC cables, sold separately), which increases speed and reliability of digital measurement records. It has a battery life of approximately 1.2 years of normal use. This unit comes with a SR-44 battery and fitted, plastic case.SpecificationsDisplay typeLCD displays in both inches and metric unitsAnvil/spindle styleDisk-shaped measuring surfacesRange0 to 1.0" (0 to 25.4mm)Resolution0.00005" (0.001mm)Accuracy+ or - 0.0002"Flatness0.00004"Parallelism0.00016"Thimble styleRatchet stopData outputYesBody dimensions156.7mm length and 25mm throat depthDisk dimensions0.787" (20mm) diameter, 0.028" (0.7mm) edge thicknessShipping weight0.95lb.Power sourceSR-44 batteryMicrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the leng...

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

The Brown & Sharpe TESA measuring head for Intrimik micrometers is an accessory for use with the Brown & Sharpe Intermik LCD capa micrometer. It has three-point contacts for self-centering measurement of the inside dimension (ID) of bores. The measuring head is made of high-grade tool steel for durability and has a satin chrome rust- and glare-resistant finish. The measuring faces are made of hardened steel and may be uncoated, TiN-coated, or tungsten carbide-tipped for wear resistance, depending on the model.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001, and is headquartered in North Kingstown, RI.

Manufacturer: M&A INSTRUMENTS INC Brand: M&A INSTRUMENTS INC Model: UM-1D Color: Black

Operating principle: Standard mode:P-E (pulse-echo) method with dual-element probes Coating mode:E-E (echo-echo) method with dual-element probes Probe zero adjustment: Selectable: 1-point calibration: normal measurement 2-point calibration: curve surface measurement or other special application with a high precision V-path correction:Automatic Measuring range: 0.8mm to 300mm; 0.031in to 11.81in in standard mode 3.0mm to 18.0mm; 0.118in to 0.709in in through coating mode Depending on probe, material and surface condition Digital resolution:0.001in or 0.1mm Units: inch or mm Display:128×64 dot-matrix LCD screen (1.65in×2.24in; 42mm×57mm) EL backlight and switchable contract ratio Digit height: 0.54in or 13.75mm Measurement update rate: 4 Hz in standard measurement mode 25 Hz in MIN capture mode Material velocity range: 1000 to 9999 m/s; 0.039 to 0.394 inch/µs Power:Two 1.5V AA alkaline batteries Warning with low battery voltage Auto shut-off:After 5 minutes of non-use Operating temperature: -10℃ to +50℃; +14℉ to +122℉ Specification to -20℃/-4℉ on request Data logger capacity: Up to 500 readings can be divided into a maximum of 5 files (user-selectable) Optional accessories: Attachable rubber case Numerous special probes on request 4-step/6-step block for calibration Data transmission cable Application software

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

The Brown & Sharpe TESA measuring head for Intrimik micrometers is an accessory for use with the Brown & Sharpe Intermik LCD capa micrometer. It has three-point contacts for self-centering measurement of the inside dimension (ID) of bores. The measuring head is made of high-grade tool steel for durability and has a satin chrome rust- and glare-resistant finish. The measuring faces are made of hardened steel and may be uncoated, TiN-coated, or tungsten carbide-tipped for wear resistance, depending on the model.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001, and is headquartered in North Kingstown, RI.

Manufacturer: Hexagon Metrology Brand: Standard Gage

The Standard Gage three-point vernier inside micrometer has three-point contacts for self-centering measurement of the inside dimension (ID) of bores and a vernier scale in inch units for making precise measurements. The micrometer includes an extension rod for access to deep bores, and a setting ring. The micrometer and accessories have a satin chrome rust- and glare-resistant finish. The contact faces are carbide-tipped for wear resistance. The vernier scale is graduated to 0.0001” or 0.0002” depending on the model. The micrometer and accessories come with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Standard Gage manufactures precision measuring equipment and metrology hand tools, and is a product line by Hexagon Metrology. Standard Gage is headquartered in North Kingstown, RI.