Dimensional Measurement - Page 318

Manufacturer: DEWALT Brand: DEWALT Model: DW088LG Color: Green

The DEWALT DW088LG 12v Green Cross Line Laser is part of the 12V lithium-ion rechargeable power tool battery platform. This line laser is designed for extra long run time and the convenience of rechargeable power tool batteries. It features self leveling cross lines that projects bright crossing horizontal and vertical lines for various leveling and layout applications. It also features an integrated magnetic bracket; rear mounted magnets allow flush attachment to metal track and steel. It has a full-time pulse mode that allows for use with detector, over-molded housing and IP65 water/debris resistance, a locking pendulum to help prevent damage to internal components. Includes: Blow Mold Case, Extended Ceiling Bracket , 12 v Battery, Charger , Green Cross Line Laser.NOTE: - Customer are suppose to slide the pendulum lock on the front of the laser before powering it on. - If this is not slid over as “on” the tool will not power on.  

Brand: Techtongda magnetic chuck

Instructions： Put the workpiece on the suction table, and then insert the wrench into the shaft hole to turn clockwise180°, the workpiece can be sucked for processing. The workpiece is completed, the wrench can be inserted into the shaft hole to turn counterclockwise 180 °, you can remove the workpiece Maintenance： Sucker should be wiped clean before use to avoid scratching the surface, after using, the surface should be coated with oil to prevent corrosion. Use of ambient temperature: -40 ℃ -50 ℃. Do not knock, to prevent magnetic reduction. Strong dense pole permanent magnet sucker is for surface grinder, sparks machine, WEDM. Very fine spacing, uniform magnetic distribution, particularly for processing small thin parts. Worktable precision no change while magnetizing and demagnetizing. Panel with special treatment, no leakage, to prevent corrosion of cutting fluid. To prolong service life of the disk, it can be placed on the cutting fluid for storage.Six-surface fine grinding processing, the sucker can be used in  vertical direction on the wire cutting machine cutting. High-performance magnetic steel disk, with suction, almost no remanence. Suction can be 120N / cm2. Application: The magnetic chuckcan be used for processing various magnetic conduction work pieces. For surface grinder, tool grinder, EDM and other applications. Thin & light weight work piece are ideally suitable because of fine-pitched magnetic poles Item included(170420): 1× magnetic chuck

Manufacturer: Checkline Brand: Checkline

Materials used: cast iron, plastics (polypropylene, polyethylene, etc.),thin fiberglass. Range in steel: 1/4" (.060" - 4.0"), 1/2" (.060" - 5.0"). Wearface diamenter: 3/8" or 5/8". Crystal diameter: 1/4" or 1/2" 1/4" diameter, 2.25 MHz dual element transducer Potted cable, side in

Manufacturer: DeFelsko Corporation Brand: DeFelsko Model: STDA1

Certified coating thickness standards are ideal for verifying the accuracy and operation of coating thickness gages and are an important component in fulfilling both ISO and in-house quality control requirements. Many organizations require verification of gage accuracy at the test site each time a coating thickness gage is put into service and at frequent intervals during use. Ideal for this purpose, Defelsko certified coating thickness standards have measured values traceable to a national metrology institution. Used to verify the accuracy and operation of any type 1 (mechanical) and type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage. Ideal for use in the calibration lab, in the field or on the factory floor. Standards with aluminum substrates consist of 4 plates mounted in a protective binder. Individually serialized for traceability to NIST or PTB - includes a certificate of calibration. Certified and labeled in both metric and imperial units. Defelsko A series epoxy on aluminum round metal plate. For PosiTector 6000 N, NS, NRS, FN, FNS, FNRS. Approximate thickness: zero for plate 1; 75 micrometer / 3 mils for plate 2; 250 micrometer / 10 mils for plate 3; 1500 micrometer / 60 mils for plate 4. Coating/ substrate: Epoxy on aluminum (non-ferrous). Accuracy: +/- 0.43 micrometer, +/- 0.017 mil. Plate Diameter: 38mm (1.5"); Measurement Diameter: 25mm (1").

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: DBHG-0024

Manufacturer: Starrett Brand: Starrett Model: 1010MZ Color: Yellow

Handy pocket gauge is approximately the size of a thin pocket watch. Ideal for inspectors, purchasing agents and salespeople to check the size of materials up to 3/8" thick. The gauge fits naturally into the curve between the thumb and index finger. A slight pull on the serrated top plate raises the spindle.

Manufacturer: Flexbar Brand: Flexbar

Digital-Dial Height Gages combines a Large .100" Revolution Dial indicator With a Dual Digital Counter for Fast and Easy, Error-Free Reading. Main Features: Double Digital counter for convenient up and down Readings in .100" increments. Two independent floating Zero adjustment buttons. 2 3/16" Dia. Dial With Wide spread .001" Graduation,100" per revolution. Continuous Dial With secondary numbers for reverse Reading. Large feed wheel for fast course movement and Fine adjustment. Positive carriage lock. Cylindrical Dual beam construction for maximum stability. Wear Resistant chrome plated beams. Heavy Base With Hardened, ground and lapped bottom surface. Carbide Tipped off-Set scriber to cover entire Range from bottom surface. Scriber Clamp also accepts 1/4" Rectangular indicator Holder. (Model No. 12937) Furnished in molded styrofoam shipPing container. 12", 18" and 24" Models Available - .001" Reading Model No. 18267, Digital-Dial Height Gage 0-24" Range

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 152-391

The Mitutoyo 152 series micrometer head has a large-diameter thimble for fine positioning and ease of reading and an anti-rotation device on the spindle for use as an XY-stage feed. The vernier scale has bidirectional graduations in inch units for taking precise measurements to 0.0001”, and a white anodized aluminum rust- and glare-resistant finish. Adjustable zero-setting through a floating thimble mechanism helps provide accuracy. The micrometer head has a plain stem for mounting in a fixture with a split-body clamp or setscrew. The flat, hardened steel measuring face helps provide durability and is lapped to help provide accuracy.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot. Micrometer heads are for mounting in fixtures, where they are typically used for measurement, or as stops or feeds.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Mahr Federal Inc. Brand: Mahr Federal Model: 4336030 Color: Black

The Mahr Federal 1075R REFERENCE Digital electronic indicator gauge, is a digital indicator for measuring short, linear distances in machining, and manufacturing applications. It has a measurement range of 0 to 0.5" (0 to 12.7mm) and a resolution of 0.0005"/0.01mm. The Large crisp LCD displays measurements in inches and metric units. The Digital Indicators 1075 R are equipped with the innovative Reference-System. The zero position only has to be set one time: once it is set, the zero remains stored for all further measurements. Therefore, when the indicator is switched ON or the measuring spindle is moved the indicator is immediately ready for measurement. With MarConnect there is no interface required. Data acquisition with MarCom Professional 5.0 now no longer requires an interface box; even so you do not lose the functionality of an interface box. Trouble free connection to measuring instruments. With MarCom all Mahr measuring instruments with MarConnect interfaces RS232, USB or Integrated Wireless can be connected; simply extend the measuring workplace with USB HubThe Digital Indicator 1087 R is equipped with a LOCK function. With this key lock the zero position is secured and operating error is avoided. The face of the indicator is fixed for easy reading in bench or fixture gages. This unit has a 8mm diameter stem and a 2.5m contact point thread mount. It has a flat back for stem mounting or plate mounting on the rear of the indicator. The 1075R is Ingress Protection certified IP52 for protection dirt and dripping water. Additional functions for this indicator include ON/OFF, RESET (Set display to zero), mm/inch, Reversal of counting direction, PRESET (for entering a numerical value), DATA (data transmission with a data connection cable), LOCK-Function: Individual buttons can be locked. The measuring force is 1 Newton (N) or less. It has a battery life of nearly 3 years of normal use. This unit comes with a CR 2032 battery.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 500-193

The Mitutoyo ABSOLUTE 500 series caliper is a Digimatic digital caliper that is made of durable hardened stainless steel and uses Mitutoyo’s ABSOLUTE linear encoder technology, which allows you to “set and forget” the origin and measure in awkward or difficult locations. This digital caliper has LCD readout and function control buttons on the caliper face, including Origin to set and retain the original measuring point, and Zero/ABS (Absolute Scale) to zero-set the LCD display. It uses the metric measuring system. Although identical to dial and vernier calipers in its ability to make precise measurements, the digital caliper also has an LCD, which clearly shows values and increases reading reliability over the other types, and reflects all ABSOLUTE system activities. The Absolute Scale (ABS) function tracks the origin point you set, even after shutoff. Once on again, the caliper can immediately start measuring, without zero resetting or concern of overspeed errors. The LCD can be "zeroed out" before making and comparing incremental measurements without having to subtract the first measurement from the second. The calipers use the ABSOLUTE electrostatic capacitance linear encoder which helps prevent overspeed errors. They measure outer diameter (OD), inner diameter (ID), depth, and step, where the butt end of the fixed jaw measures one end of a work piece before its upper/lower or inner/outer "steps" are measured. LCD Resolution is 0.01mm. Also included are origin-setting, zero-setting, and on/off automatic shutoff function buttons. A Digital LCD Data Reading Hold function is available with the optional Data Hold Unit (sold separately). An alarm alerts the user to low voltage and scale contamination and counting value composition errors. A rolling thumb wheel makes fine adjustments and a thumb screw locks the scale’s position. Response speed is unlimited. Each caliper includes, and is powered by, one SR44 silver oxide cell battery that lasts approximately 3.5 years with continuous nor...