Dimensional Measurement - Page 680

Manufacturer: Starrett Brand: Starrett Model: 436.1P-3

The Starrett 436.1 series outside micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, and a tapered frame for measuring narrow slots and tight places. The micrometer’s steel frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.001”, with a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat, micro-lapped steel measuring faces for accuracy.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 513-455E Color: Yellow

The Mitutoyo 513 series dial test indicator has a yellow face, an 8mm stem diameter, and metric measurements. The indicator has a reversible measuring direction and an adjustable contact point, and is used to measure surface variations in narrow or recessed areas. The vertical face is perpendicular to the axis of the indicator and three dovetail mounts, and can be mounted either horizontally or vertically from the front, top, or back of the indicator. It has a unified outer frame that prevents oil and water from permeating the front face, a hard frame body that provides rigidity and durability, and a clear, flat, and scratch-resistant crystal face. This dial indicator meets Japanese Industrial Standard (JIS) B7533-1990. The basic set includes a dial indicator, a 2mm carbide contact point, an 8mm diameter stem, a knurled clamp ring, and a plastic storage box.Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, non-magnetic pointer and contact point for secure operation in magnetic environments, and a yellow face that meets ANSI standards for metric indicators.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Standard dial indicators measure the d...

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-246-123-0

The Fowler 52-246 series outside micrometer has a digit display with a choice of measuring range, 0.00001" graduations, and a blade-style anvil/spindle pair to measure groove diameters of shafts and workpieces with narrow or recessed features. The digit display has 0.0001" graduations and an accuracy of 0.0002" on 1" and 2" models for precise readings and accurate measurements. The positive locking lever on the spindle locks measurements in place for accurate readings. A non-rotating spindle keeps workpieces stable during measurements. Hardened, ground, and micro-lapped measuring faces provide wear resistance. The hardened, ground, and lapped spindle thread provides smooth movement, accuracy, and long life. A friction thimble applies constant force for repeatability between users. Friction-style thimbles are suitable for one-handed operation and stop turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. SpecificationsDisplay type Digit Anvil/spindle style Blade Measuring range Varies Graduation interval 0.0001" Accuracy 0.0002" on 1" and 2" micrometers Thimble style Friction Blade thickness 0.30" Blade width 0.235" Blade penetration 0.255" Total anvil length including blade 0.600"Micrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The Fred V. Fowler Company manufactures inspection and measurement instrumen...

Manufacturer: Hexagon Metrology Brand: Standard Gage

The Standard Gage 07734001 vernier scribing height gauge has a measurement range of 0” - 12”/0 - 300 mm, and is graduated to 0.001”/0.02 mm. Graduations on the right scale are in standard inch units, while graduations on the left scale are in metric units. The scriber, used to mark a position on a workpiece, is 13 mm x 70 mm (H x W), and is carbide-tipped for hardness and to help prolong life. The slider and beam are made of stainless steel. The scales and vernier backgrounds have a glare-free satin chrome finish that helps resist rust. The unit comes with a protective case and inspection report. A vernier scale provides precise measurement through a second sliding scale that indicates where measurement lies between marks on the main scale. A calibrated screw mechanism supports fine, uniform slider adjustments. Height gauges, also called gages, are precision measuring instruments that travel on a vertical column (also called the beam) to measure and/or mark the vertical distance from the base of an object in fine units. The vertical position of the gauge and its attached pointer are changed by turning a calibrated screw, or one or more feed wheels. Recorded rotations are read from a scale, a dial, counters, and/or an electronic display. A screw clamp holds the pointer to the gauge. The pointer is typically sharpened to act as a scriber, and can be used to mark a position on a workpiece by scratching its surface. On compatible units, the scriber may be replaced by an electronic touch-signal probe. Height gauges are typically used in manufacturing, machining, and mechanical engineering. Standard Gage manufactures precision measuring equipment and metrology hand tools, and is a product line by Hexagon Metrology. Standard Gage is headquartered in North Kingstown, RI. What’s in the Box? Standard Gage 07734001 Vernier Scribing Height Gauge Protective case Inspection report

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 169-203

The Mitutoyo 169 series disk micrometer has disc-shaped measuring faces with flanges for measuring the pitch of gear teeth, a vernier scale in inch units for taking precise outside diameter (OD) measurements, and a non-rotating spindle that helps provide steady positioning during measurement. It also has a ratchet-stop mechanism for uniform pressure during adjustment.The micrometer’s frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.001”, and has a satin chrome rust- and glare-resistant finish. The diameter of the measuring discs is 20mm. The micrometer comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: ABS Import Tools, Inc. Brand: HHIP Model: 4200-0011

HHIP precision outside micrometer set features hardened and precision ground anvil spindle thread with microlap finish on ends. Meets or exceeds Federal specifications. Micro fine graduations. Spindle lock. Graduation: 0.0001". Carbide faces. Ratchet stop. Fitted case. Standards included. Product specifications: description: 0 - 6".

Manufacturer: Meda - Superior Import Brand: Meda - Superior Import

Furnished with two error proof digital counters which can be reset individually anywhere within the range for quick and easy upward and downward reading. The last digit on the counter is .1" or 1.0mm. The dial face is graduated in .001" • Bottom surface of the base is stainless steel, hardened and ground • With fine-adjusting wheel and lock • Carbide tipped scriber

Manufacturer: Mahr Brand: Mahr Federal Model: 4306200

Mahr Federal 800 SL MarTest 4306200, 0.01mm x ±0.25mm Standard Test Indicator, 0-25-0, 1.1 Dial Dia., 1.62" styli. Test indicators are invaluable for surface plate layout work when doing comparative measurements. Includes storage case and contact wrench.

Manufacturer: SUBURBAN Brand: Suburban

*SineSet® models bolt directly to SineSet® sine plate or compound sine plates of the same series. S1 models also bolt to the AP-664-S1 90° conversion plate.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 147-301

The Mitutoyo 147 series hub micrometer has a shallow-throated frame for measuring hub thickness and shoulders inside a bore, and a vernier scale in metric units for taking precise outside diameter (OD) measurements. It also has a ratchet-stop mechanism for uniform pressure during adjustment. The micrometer has a baked enamel finish for protection and durability of frame. The vernier scale on the thimble and sleeve is graduated to 0.01mm, and has a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. The micrometer comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.