Dimensional Measurement - Page 1209

Manufacturer: Westward Brand: Westward

Depth Micrometer, Range 0-6 In./mm, Resolutions 0.001 In./mm, Ratchet Thimble, Flat Anvil, Base Length 2 1/2 In., Number of Measuring Rods 6, Number of Gauges 1, Rod Dia. 0.177 In., Rod Type Steel, Lock Nut Type Clamp, Depth Micrometer, Vernier Scale

Manufacturer: INSIZE Brand: INSIZE Model: 3232-4

Blade micrometer, 3-4", graduation 0001".

Manufacturer: M&A INSTRUMENTS INC Brand: M&A INSTRUMENTS INC Model: AR63A

Features: Vibration meter(also called also called vibration severity) uses Piezoelectric Acceleration Transducer transfer the vibration signal in to electrical signal, analyze the input signals, and show the Acceleration, speed, shift of the vibration.It is widely used in the lines of Power, petrochemical, machinery manufacturing, metallurgy, vehicles, etc. Specifications: •Vibration Pickup:Piezoelectric Ceramic Accelerometer(shear-type) •Acceleration:0.1~199.9m/s2 •Velocity:0.1~199.9m/s •Displacement:0.001~1.999mm •Acceleration Frequency Range:10HZ~1KHZ(LO);1KHZ~15KHZ(HI) •Velocity Frequency Range:10HZ~1KHZ •Displacement Frequency Range:10HZ~1KHZ •Accuracy:±10%H±2digits •Singnal Output:AC output •Auto Switch Range:√ •Backlight:√ •Auto Power off:√ •Power:9VDC battery •Product Net Weight:147g •Product Size:67*30*183mm •Packing:Aluminium box

Manufacturer: Starrett Brand: Starrett Model: 220XRL-1

The Starrett 220XRL series Mul-T-Anvil micrometer uses interchangeable anvils to support varied measurement needs, and includes a flat and rod anvil. It has a vernier scale in inch units for taking precise outside diameter (OD) measurements, and a ratchet-stop mechanism for uniform pressure during adjustment. The vernier scale on the thimble and sleeve is graduated to 0.001”. The micrometer is made of high-grade tool steel with a satin chrome rust- and glare-resistant finish. The spindle is micro-lapped for accuracy and carbide-tipped for wear resistance. A knurled ring-type lock nut helps provide secure locking of the measurement position.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: Starrett Brand: Starrett Model: 220XRL-1

The Starrett 220XRL series Mul-T-Anvil micrometer uses interchangeable anvils to support varied measurement needs, and includes a flat and rod anvil. It has a vernier scale in inch units for taking precise outside diameter (OD) measurements, and a ratchet-stop mechanism for uniform pressure during adjustment. The vernier scale on the thimble and sleeve is graduated to 0.001”. The micrometer is made of high-grade tool steel with a satin chrome rust- and glare-resistant finish. The spindle is micro-lapped for accuracy and carbide-tipped for wear resistance. A knurled ring-type lock nut helps provide secure locking of the measurement position.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: Vermont Gage Brand: Vermont Gage

The Vermont Gage steel go and no-go gage set is a class X inch plug gage set for inspecting pitch diameter and functional threads of internally threaded parts. This tool is made from Rockwell c scale (Rc) cold stabilized steel for durability. It has a 2” handle with a threaded go plug on one end and a threaded no go plug on the other. A certificate of accuracy traceable to National Institute of Standards and Technology (NIST) is available for each gage, and each handle is marked with nominal size, threads per inch, class of fit, and pitch diameter. This gage set meets American National Standards Institute (ANSI) B1.2 standard for unified screw threads and is available in a range of sizes and thread fits for different applications. Vermont inch gages have light blue handles to help avoid confusion with metric gages (that have yellow handles) during inspection. This inch gage set is available in a range of sizes followed by an abbreviation that indicates the type of thread to be inspected, including NPSM (National Pipe Straight Mechanical), UN (Unified), UNC (Unified Coarse), UNF (Unified Fine), or UNEF (Unified Extra Fine). This go and no go gage set can be ordered with a class fit of 2A (looser tolerance) or 3A (for a tighter tolerance). Go and no-go plug gages are used to inspect the pitch diameter and functional thread for internally threaded parts to determine if they pass or fail tolerances (allowed deviation from the stated size). Go gages inspect form, lead, and pitch to ensure that the part being inspected is smaller than the maximum permitted pitch diameter and functional size, if the gage screws into the go plug gage it “passes”. No-go gages inspect pitch diameter and determine if a part is larger than the minimum size requirement by its inability or “failure” to screw into the threaded part (the part’s thread is too small). Go and no-go plug gages are used in conjunction to inspect the size and tolerance of threaded parts. They are available in different classes, bas...

Manufacturer: Mitutoyo Brand: Mitutoyo

Measures hard to reach locations such as from a hole or slot to an edge, small tube wall thickness, shoulder to an edge, etc.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 293-146

The Mitutoyo 293 series QuantuMike Coolant Proof LCD micrometer has a digital single-value LCD readout that displays in metric units with resolution to 0.001mm. A ratchet thimble mechanism helps provide uniform pressure for precise, repeatable measurement. It also has a non-rotating spindle that helps provide steady positioning during measurement, and a QuantuMike spindle that feeds at a rate of 2mm per revolution for a higher rate of productivity than a conventional mechanism. It uses the Mitutoyo ABSOLUTE electrostatic capacitance linear encoder to help prevent overspeed errors and help ensure repeatable, precise measurement.The micrometer’s electronic microprocessor can hold measurements at any position, convert to absolute value, set a temporary zero position, and return to a true zero reading. Depending on the model, an output jack transmits Statistical Process Control (SPC) data results to a computer or external device through an interface cable (sold separately). The micrometer has an Ingress Protection 65 (IP65) rating, which means that components are resistant to penetration by dust and debris, and resistant to penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. The micrometer includes, and is powered by, a single SR44 silver oxide battery, and comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior d...

Manufacturer: Meda - Superior Import Brand: Meda - Superior Import

Furnished with two error proof digital counters which can be reset individually anywhere within the range for quick and easy upward and downward reading. The last digit on the counter is 1.0mm. The dial face is graduated in .01mm. / Bottom surface of the base is stainless steel, hardened and ground / With fine-adjusting wheel and lock / Carbide tipped scriber

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-246-122-0

The Fowler 52-246 series outside micrometer has a digit display with a choice of measuring range, 0.00001" graduations, and a blade-style anvil/spindle pair to measure groove diameters of shafts and workpieces with narrow or recessed features. The digit display has 0.0001" graduations and an accuracy of 0.0002" on 1" and 2" models for precise readings and accurate measurements. The positive locking lever on the spindle locks measurements in place for accurate readings. A non-rotating spindle keeps workpieces stable during measurements. Hardened, ground, and micro-lapped measuring faces provide wear resistance. The hardened, ground, and lapped spindle thread provides smooth movement, accuracy, and long life. A friction thimble applies constant force for repeatability between users. Friction-style thimbles are suitable for one-handed operation and stop turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. SpecificationsDisplay type Digit Anvil/spindle style Blade Measuring range Varies Graduation interval 0.0001" Accuracy 0.0002" on 1" and 2" micrometers Thimble style Friction Blade thickness 0.30" Blade width 0.235" Blade penetration 0.255" Total anvil length including blade 0.600"Micrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The Fred V. Fowler Company manufactures inspection and measurement instrumen...