Dimensional Measurement - Page 577

Manufacturer: Zokop Brand: Zokop

Specifications: 1. Color: Red,Black 2. Measuring Accuracy: Typical ±2mm 3. Display Accuracy: 1mm 4. Measuring Range: 0.05~100m(Built-in Angle Measurement) 5. Model: RZX-100 6. Measurement Unit Options: M/mm/in 7. Horizontal Measurement: Yes 8. Horizontal Measurement Range: ±45° 9. Horizontal Measurement Accuracy: ±0.3° 10. Continuous Measurement Function: Yes 11. Outdoor Target Reflection Board: No 12. Area Measurement Function: Yes 13. Volume Measurement Function: Yes 14. Indirect Measurement Function: Yes 15. Pythagorean Proposition Measurement Function: Yes 16. Plus-minus Method: Yes 17. Minimum/maximum Measurement: Yes 18. Display Illumination: Yes 19. Show Beep: Yes 20. Multifunctional End Piece: Automatically 21. Protection Against Splashes and Dust: IP54 22. Historical Storage: 10 23. Temperature Range for Operation: 0℃~+40℃ 24. Temperature Range for Storage: -20℃~+70℃ 25. Battery Life: 5000~8000 Measurements 26. Battery Selection: Lr6(AAA)2 x 1.5 V(Not Included) 27. Switch-off Automatically: After 30 Seconds 28. Instrument Switch-off Automatically: After 3 Minutes 29. Dimensions: (4.41 x 1.57 x 0.98)"" / (11.2 x  4 x 2.5)cm (L x W x H) 30. Weight: 3.92 oz / 111 g 31. Distance Measurement with Tilt Sensor: Yes Package Includes: 1 x Hand Strap 1 x Operation Instruction 1 x Protection Package 1 x Warranty Card

Manufacturer: Generic Brand: Johnson Color: Multi

Johnson 524 Brass Bound Mahogany 24' Level. Mahogany with angled brass bound edges. Each sight contains two individually-calibrated` yellow dual-curved vials that are insert molded and protected with a glass lens. Shock-protecting end caps. Frame dimensions: 1-3/16 In. x 2-7/16 In. Made of select kiln-dried mahogany finished with 2 protective coats of clear` hand-rubbed lacquer. Edges are guarded by double-angle screwless brass bindings. Rubber end-caps are screwed on for better shock-absorption and durability. 2 clear curved vialsper sight` each solid-set by hand. Heavy glass lenses protect all vials with a water-tight seal. 18' through 28' sizes have hand grips` remaining sizes feature convenient hand holes. 1-3/16' x 2-7/16' frame. 6243596

Manufacturer: Starrett Brand: Starrett Model: 672-4

Featuring a universal ball joint attached to the end of a gooseneck shank, these attachments make it possible to position an AGD indicator at any desired setting. The indicator can be rotated 360 degree and angularly up to 90 degree and locked in the desired position by tightening a single knurled nut. Straight shank is 3/8" (9.5mm) in diameter.

Manufacturer: Q-Mark Manufacturing Inc. Brand: Q-Mark

M5 stylus, 1.0 mm diameter ruby ball, 0.7 mm diameter carbide stem, 11.0 mm diameter x 10.0 mm long stainless steel base. Overall stylus length is 25.0 mm. Stylus weight is 5.68 grams.

Manufacturer: Vermont Gage Brand: Vermont Gage

Vermont Gage's thread gages inspect the pitch diameter and the functional thread for both internal and external threaded products. All thread gages are marked with nominal size, class of fit and pitch diameters.

Manufacturer: INSIZE Brand: INSIZE Model: 6313-1D8

Setting ring, 1.8 inch dia.

Manufacturer: Moore and Wright Brand: Moore & Wright Model: MW100-30BI

Measuring surface is micro-lapped. Standard DIN 862. Packed in plastic box. Capacity - 300mm/ 12inch Resolution - 0.02mm/0.001inch Jaw length - 40mm. Moore and Wright HistoryFounded in 1906 by innovative young engineer Frank Moore, Moore and Wright has been designing, manufacturing and supplying precision measuring equipment to global industry for over 100 years. With roots fixed firmly in Sheffield, England, the company began by manufacturing a range of calipers, screwdrivers, punches and other engineer's tools.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 2929SB-62 Color: Yellow

Dial indicators are Mitutoyo’s most popular, and have the widest application. Standard 0.01mm graduation dial gauges having an outer frame with an outside diameter of 57mm. All types come with limit pins and an outer frame clamp as standard. Secured adhesion between the outer frame and crystal as well as the use of an O-ring ensure countermeasures against water and oil permeation via the front face. The outer clamp and lifting lever (optional) can be attached to either the right or left side. These parts can be easily installed and removed without tools.

Manufacturer: Branded Brand: Unknown Color: Multi

Woodpeckers Tools Precision Triangle SetFor Decades; Craftsmen Have Used Squares To Layout Projects On Flat Work Pieces. Another Handy Layout Tool; But often Overlooked; Is A Triangle. It Simultaneously Serves As A Square And A 45; All In One. A Pocket Or Apron Sized Triangle Is Just The Tool For Squaring From The Inside of Boxes And Drawers During Assembly. Triangles Are Also Great Tools For Quickly Drawing Perpendicular Lines From An Inside Reference Edge.Features:Set Includes 4.5 & 6.25" TrianglesMachined From 1/4" Thick Aluminum Tooling Plate; Buffed To A Satin Finish & Anodized For DurabilityLaser Engraved Inch Scale Markings On All Three Legs (of Each Triangle)Right Angle Legs Are Standard Scales (1/16" Scale Graduations)Woodpeckers Tools Guarantee Accuracy To Well Within .001""

Manufacturer: Starrett Brand: Starrett Model: 670B

The Starrett 670B hole attachment is used with any dial indicator made to American Gage Design (AGD) standards to measure the inside of holes of other recessed areas. The attachment has a 0.375"/9.5mm diameter stem and a 0.5625"/14mm measuring range for hole depths up to 1.6875"/42mm. The contact point on the end of the swivel arm which contacts the workpiece has a 1/8"/3mm diameter.Dial indicators are also called dial gauges, probe, and electronic indicators. These precision instruments measure small linear distances and object sizes. The dial magnifies the measurement so that it can be easily read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Standard dial indicators measure the displacement along the axis of the indicator. Dial test indicators are very similar to dial indicators, except that the axis of measurement is perpendicular to the axis of the indicator. Dial and dial test indicators can be analog, with a mechanical dial, or electronic, with a digital display. Some electronic models transfer the data electronically to a computer for recording and potential manipulation.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company, founded in 1880, is headquartered in Athol, MA.