|
|
-
4.0 of 5.0 with 1 Reviews
SALE PRICE: $235.00 28% OFF
Manufacturer: CAS Corporation
Brand: CAS
Model: CI-2001B
Manufacturer: CAS Corporation
Brand: CAS
Model: CI-2001B
The CI-2001B Indicator with RS-232. Use in a variety of applications - floor scales, livestock scales, platform scales, pallet scales, and much more. With it's bright LCD display, the CI-2001B Indicator is easy to read. Legal for trade.
-
4.0 of 5.0 with 1 Reviews
SALE PRICE: $235.00 1% OFF
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Color: White
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Color: White
|
The Brown & Sharpe TESA Tesatast series dial test indicator has a white face, a 0.0787" stem diameter, and inch measurements. The indicator can make either horizontal or vertical measurements, and the choice of white or yellow dial help make measurements easy to read. The yellow face with contrasting black hand complies with ANSI standards for metric dial faces. The carbide, ball-contact tip reaches into the workpiece for accurate measurements of turned, milled, and ground parts, and for tool setting gauges, fixtures, and inspections. The continuous clockwise pointer rotation helps prevent plus or minus confusion and displays reading in fractional inches. The ball-bearing lever system swivels through to 180 degrees. The dial face mounted at the top of the indicator parallel to the axis, and three universal dovetail mounts can be used for mounting from the top, front, or back. Dovetail mounts provide a rigid setup. This indicator has a Monoblock body design with pinions mounted in jeweled bearings in an isolated assembly separate from the outer body, for high accuracy. It is anti-magnetic for safety when used around magnetic workpieces and debris, and has full-metal construction for durability and corrosion resistance. This dial test indicator meets Deutsches Institut fur Normung (DIN) 2270, and Norme Francaise (French Institute for Standardization) NF E 11-053 standards, and includes an identification number and a declaration of conformity. The set includes a dial test indicator, a 0.080" (2mm) ball-end carbide contact point, a 0.310"(8mm) extension with dovetail, a point key, a Certificate of Accuracy and Traceability, and a storage box. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced ...
-
4.0 of 5.0 with 32 Reviews
SALE PRICE: $235.20 1% OFF
Manufacturer: Accusize Co. Ltd.
Brand: Accusize Industrial Tools
Model: 3221-3224
Manufacturer: Accusize Co. Ltd.
Brand: Accusize Industrial Tools
Model: 3221-3224
-
4.0 of 5.0 with 22 Reviews
SALE PRICE: $235.59 1% OFF
Manufacturer: Fowler
Brand: Fowler
Manufacturer: Fowler
Brand: Fowler
1.375" Holemike XT Setting Ring
-
4.0 of 5.0 with 2 Reviews
SALE PRICE: $235.92 1% OFF
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-222-211-0
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-222-211-0
|
The Fowler EZ-Read steel digit micrometer has a choice of measurement range and a flat anvil/spindle pair for general purpose measuring. The digit display has 0.0001" graduation intervals and an accuracy of 0.0002" for precise readings. Carbide-tipped measuring faces provide wear resistance. A friction thimble provides smooth and quiet operations, and is suitable for one-handed operation. Friction-style thimbles stop turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. The insulated steel frame helps reduce temperature-related expansion or contraction providing for accurate measurements. The micrometer includes a wrench and fitted case. Micrometers 2" and above include a standard. SpecificationsDisplay type Digit Anvil/spindle style Flat Measuring range Varies Graduation Interval 0.0001" Accuracy 0.0002" Thimble style FrictionMicrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The Fred V. Fowler Company manufactures inspection and measurement instruments such as electronic indicators, calipers, bore gages, and digital scales. The company, founded in 1946, is headquartered in Newton, MA.What’s in the Box? Fowler Steel EZ-Read Outside Digit Micrometer Standard (for sizes 2" and above)Wrench Fitted case
-
4.0 of 5.0 with 34 Reviews
SALE PRICE: $238.00
Manufacturer: Starrett
Brand: Starrett
Model: RV363RL
Manufacturer: Starrett
Brand: Starrett
Model: RV363RL
|
The Starrett 363 series digital micrometer head has a mechanical digit counter in inch units for ease of reading to 0.001â€, and a knurled ring-type lock nut to hold measurements in place. The micrometer is available with a plain stem for mounting in a fixture with a split-body clamp or setscrew, or a clamp-nut stem for quick mounting. The micrometer has a satin chrome rust- and glare-resistant finish. The spindle is made of hardened steel to help provide durability, with a flat measuring face suitable for measurement or use as a stop, and is micro-lapped to help provide accuracy.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot. Micrometer heads are for mounting in fixtures, where they are typically used for measurement, or as stops or feeds.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.
-
4.0 of 5.0 with 1 Reviews
SALE PRICE: $239.95 12% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 3089Z-131-26J
Manufacturer: Starrett
Brand: Starrett
Model: 3089Z-131-26J
The Starrett 3089 Series Dial Bore Gage offers precision, a full compliment of features and excellent value.
-
4.0 of 5.0 with 46 Reviews
SALE PRICE: $239.95
Manufacturer: Shars
Brand: Aventor
Manufacturer: Shars
Brand: Aventor
SKU 303-3566 DIAL INDICATOR CATEGORY Electronic BRAND Aventor MEASURING RANGE - DIAL INDICATOR 2"/50mm AGD GROUP 2 FACE DIAMETER 2-3/8 STEM DIAMETER 3/8 BACK TYPE Lug RESOLUTION 0.00005"/0.001mm ACCURACY 0.0002"/0.005mm CONTACT POINT THREAD SIZE 4-48
-
4.0 of 5.0 with 46 Reviews
SALE PRICE: $242.00 1% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 207MZ
Manufacturer: Starrett
Brand: Starrett
Model: 207MZ
|
The Starrett 208 series can seam micrometer has a vernier scale in metric units for taking measurements of the width, height and depth of can seams. The micrometer is made of stainless steel for durability, with a satin chrome rust- and glare-resistant finish, and a knurled sleeve that helps provide a secure grip. The vernier scale on the thimble and sleeve is graduated to 0.01mm for taking precise outside diameter (OD) measurements. Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.
-
4.0 of 5.0 with 48 Reviews
SALE PRICE: $242.00 1% OFF
Manufacturer: Starrett
Brand: Starrett
Model: T231XRL
Manufacturer: Starrett
Brand: Starrett
Model: T231XRL
This is a slightly heavier micrometer with thermal insulators mounted on the frame front and rear. Ring-type knurled lock nut for quick and sure locking. Rigid one-piece frame of drop forged steel. Extremely hard and stable one-piece spindle (the heart of our accuracy).Micro-lapped measuring faces. Quick and easy adjustment.
Viewing Page 1053 of 1520
|
|