Dimensional Measurement - Page 1054

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 209-789 Color: White

The Mitutoyo 209 series internal measurement dial caliper gauge has a dial display and large measuring depth for taking inside dimension (ID) comparison measurements in metric units of hole diameters, thickness of grooves or tubes, and other hard-to-reach internal dimensions. They should be used with a setting ring or micrometer (sold separately). Depending on the model, the caliper may come with ball contact points suitable for measuring external wall thickness of tubes, chisel contact points suitable for measuring flat surfaces, or an interchangeable set of contact points. The calipers’ jaws are spring loaded, which provide the point contacts with constant measuring pressure. The calipers have an Ingress Protection 65 (IP65) rating, which means that components are resistant to penetration by dust and debris, and resistant to penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet. Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, and machining. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw, and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the main scale to obtain the result. The digital caliper takes a differential by zeroing the display...

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

The Brown & Sharpe chrome-framed outside micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, a convertible friction drive thimble mechanism for uniform or variable pressure during adjustment, and tungsten carbide faces for wear resistance.The micrometer’s frame, thimble, and sleeve have a satin chrome rust- and glare-resistant finish. Frames with a base measurement range greater than or equal to 1” are heat-insulated to help reduce temperature-related expansion or contraction. The vernier scale on the thimble and sleeve is graduated to 0.0001”. Depending on the model, graduation markings on the barrel may be straight or slanted to help reduce parallax errors when reading. The ratchet mechanism can be disabled for variable adjustment control. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position. /p>Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001, and is headquartered in North Kingstown, RI.

Manufacturer: Mitutoyo America Corporation Brand: Mitutoyo Model: 511-716

Mitutoyo Dial Bore Gage 511-716, 250-400mm with2046SB dial indicator,0.01mm grad., stem 8mm diam.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-396B

Mitutoyo Low Force IDC Digimatic Indicator, Resolution: .00005"/.0001"/.0005"/0.001mm/0.01mm Range: .500", Stem diameter: 3/8", Back: Flat back, Output: Yes, Face rotation: 330°, Functions: Origin-set/Preset, Zeroset, GO/±NG judgment, Counting direction

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: EE20-50

Manufacturer: INSIZE Brand: INSIZE Model: 2114-51FE

Compact electronic indicator, 2 inch 5mm resolution 00005 inch 0/001mm.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 152-372

The Mitutoyo 152 series large micrometer head has a vernier scale in inch units for taking precise measurements and a large-diameter thimble for ease of reading. It has a plain stem for mounting in a fixture with a split-body clamp or setscrew. The vernier scale has bidirectional graduations to 0.001”, and has a white anodized aluminum rust- and glare-resistant finish. The flat measuring face is carbide-tipped for wear resistance and is lapped to help provide accuracy.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot. Micrometer heads are for mounting in fixtures, where they are typically used for measurement, or as stops or feeds.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Berntsen Brand: Berntsen

The RS193M target has a plastic housing with 30 x 30 mm reflective target which can be rotated 360° for unlimited tilting and turning options. RS193M Reflective TargetThe RS193M attaches to any steel structure with magnets embedded into the housing or can easily attached by bolts, screws or be glued to difficult surfaces such as glass and marble facades, historic buildings, steel girders, rail lines, gas and oil pipelines, etc.

Manufacturer: G.A.L. Gauge Co. Brand: G.A.L. Gauge Co.

The G.A.L. Gauge Co. American Welding Society (AWS) Tool Inspection Kit, Metric Measurement Scale is comprised of 0-150mm Dial Caliper, 6" Scale w/ Clip, 0-1" Micrometer, 2" Reading Glass, 7 Piece Fillet Weld Set, V-WAC Gauge*& AWS Type Gauge

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: EGEE-1006