Dimensional Measurement - Page 1055

Manufacturer: iGaging Brand: iGaging

iGaging Professional Tools, SUPER Precision, IP65 Fluid & dust protection! Crisp, clear, easy-to-read LCD display, accurate to 0.00016''. Hardened and ground spindle with carbide anvil ensure durability and accuracy. Comes in a padded case with adjustment wrench, instructions booklet and extra battery. Features: Traditional Standard Vernier analog scale on stem Digiatl Electronic Display with 2 measuring modes Metric/Standard IP65 Protection for water, Oil and Dust Large LCD Display Absolute & Incremental Modes Automatic Switch Off Accuracy +/- 0.00016" Range 0-1", 1-2", 2-3"/0-25mm, 25-50mm, 50-75mm Resolution 0.00005"/0.001mm Carbide Measuring Surfaces Exceeds USA Federal Accuracy Standards

Manufacturer: INSIZE Brand: INSIZE Model: ISM-ZS30-EPD10X

Eyepiece, 10x Dividing eyepiece (0. 1mm/Div. ).

Manufacturer: YPG Gages Brand: YPG Gages Model: U2X

Sound, structurally stable, design and specifications, coupled with a highly experienced, solid manufacturing and quality management system, guarantees YPG Adjustable Limit Snap gages supplied into the USA market are of the highest quality. gages can be 'Set, Sealed and Certified' to pre-determined Go/No Go sizes in YPG's accredited calibration laboratory. A fully stabilized cast iron frame forms the base of the 'U' type adjustable limit snap gage. The one piece, knife edge, rectangular anvil and the two knife edge, adjustable anvils are all manufactured from hardened, lapped, tool steel. The blades of the type 'U' make its primary use that of gauging the lower diameter of external grooves. Having only two adjustable anvils, the Go/No Go setting procedure is quick and straightforward. The blades are supplied with a standard thickness and depth, both of which can be modified by YPG to meet specific customer application requirements. Radius and chamfer changes can also be modified on request. In addition the 'U' type is very readily used as a more robust replacement for the "Reef" type gage. The Quality Management System operated by YPG is ISO 9001-2000 registered. This certification encompasses the entire organization and confirms the company's management system meets the required standard and in particular confirms the desire to exceed customer expectations and to be continually improving the products and services offered. All gages set at YPG are done in the company's state of the art, A2LA certified metrology laboratory. Product certification can be supplied on any gage calibrated or set in the laboratory. Adjustable Limit Snap Gages are precision gauging devices generally used in a production environment for the rapid, accurate and foolproof inspection of component parts during and after a production. There are certain basic rules which need to be followed to ensure adjustable limit snap gages perform to their expected accuracy and have a long operational life. 0" - 1/4" inch range and 0 - 6mm metric range.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-502B

The Mitutoyo 543-502B Absolute Solar Digimatic Indicator is an inch and metric digital indicator with LCD for measuring surface variations that has measurement range of 0.5"/12.7mm and a resolution 0.00005"/0.001mm, a flat back, a 3/8" stem diameter, and a solar-powered battery that provides continuous operation at a lighting level of 40 lux and greater. The battery has a reserve capacity of approximately 3.5 hours when fully charged. The indicator's absolute sensor automatically restores the last origin position when the unit is powered on, aiding multipoint measurement. The flat back design allows stem mounting or plate mounting on the rear of the indicator. The indicator is Ingress Protection certified IP42 against solid objects over 1mm and direct sprays of water up to 15 degrees from the vertical. It meets ANSI (American National Standards Institute) standards and AGD (American Gage Design) standards for stem diameter. It has an SPC (statistical process control) output by which data may be exported. Indicators are used manufacturing and scientific applications to monitor and measure tolerance. SpecificationsUnitsInch and metric, selectableDisplayLCDRange0.5"/12.7mmResolution0.00005"/0.001mmAccuracy0.0001"/0.003mmMeasuring force1.5 N or lessStem diameter3/8"MountingFlat backPower sourceSolar-powered battery (installed)Dial indicators are also called dial gauges, probe, and electronic indicators. These precision instruments measure small linear distances and object sizes. The dial magnifies the measurement so that it can be easily read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Standard dial indicators measure the displacement along the axis of the indicator. Dial test indicators are very similar to dial indicators, except that the axis of measurement is perpendicular to the axis of the indi...

Manufacturer: Starrett Brand: Starrett Model: S579HZ

The Starrett S579HZ set of six telescoping gauges measures 5/16 to 6" holes, slots, and recesses in woodworking, metalworking, machining, layout, and pattern-making applications. The four gauges measure from 5/16 to 1/2", 1/2 to 3/4", 3/4 to 1-1/4", 1-1/4 to 2-1/8", 2-1/8 to 3-1/2", and 3-1/2 to 6". Each gauge has two spring-tensioned telescoping plungers for uniform contact pressure. The self-centering handles are rigidly attached to contact plungers. Five handles measure 2-3/8" and one handle measures 3-1/4" in length. A lock at the end of the handle secures the gauge width for measurement with a micrometer (sold separately). The gauge set comes in a protective case for storage. The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company, founded in 1880, is headquartered in Athol, MA. What's in the Box?(6) piece telescoping gauge setProtective case

Manufacturer: INSIZE Brand: INSIZE Model: 2187-108

Adjustable snap gage, 3.98-4.25".

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe Model: 599-3-31

The Brown & Sharpe chrome-framed outside micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, a convertible friction drive thimble mechanism for uniform or variable pressure during adjustment, and tungsten carbide faces for wear resistance.The micrometer’s frame, thimble, and sleeve have a satin chrome rust- and glare-resistant finish. Frames with a base measurement range greater than or equal to 1” are heat-insulated to help reduce temperature-related expansion or contraction. The vernier scale on the thimble and sleeve is graduated to 0.0001”. Depending on the model, graduation markings on the barrel may be straight or slanted to help reduce parallax errors when reading. The ratchet mechanism can be disabled for variable adjustment control. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position. /p>Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001, and is headquartered in North Kingstown, RI.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 511-128-05

The Mitutoyo 511-128-05 Dial Bore Gauge has a measurement range of 50 to 100mm. This direct-measuring gauge uses a two-point contact system can be used to detect geometry problems such as ovality and taper and carbide-tipped contact points offer extended wear and improved abrasion resistance. This gauge is for use with Mitutoyo dial indicators (sold separately).Bore gauges measure holes, or bores, in a workpiece. They can measure the interior diameter of a hole at any depth, while internal micrometers can only measure to the depth of their teeth. Bore gauges are typically calibrated with a setting ring and come in two types: simple and direct-measuring. Simple bore gauges are used with a caliper to transfer the hole measurement, while the more complex gauges take the measurement directly, and display it through a vernier, dial, or digital display. Bore gauges have a two- or three-point contact, indicating how many points on the gauge head touch the inside of the bore. Two-point contacts are better at measuring ovality, while three-point contacts are used to measure lobing or triangular form error. Pistol-grip bore gauges are used for fast, single-handed operation with repeatable results from one operator to another. Bore gauges can also be used in special applications, such as measuring threads, spline pitch diameters, and deep bores.Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems. The company, founded in Tokyo in 1934, formed Mitutoyo America Corporation in 1963 with headquarters in Aurora, IL.

Manufacturer: Starrett Brand: Starrett Model: 824A

The Starrett 824 series fixed range vernier inside micrometer has an adjustable sleeve and adjustable contacts on the thimble end help provide accurate measurements, and a vernier scale in inch units for making precise measurements. A knurled thimble helps provide secure grip, and the handles are heat-insulated to help reduce temperature-related expansion or contraction. The vernier scale is graduated to 0.001” and a knurled ring-type lock nut holds measurements in place. The micrometer has a satin chrome rust- and glare-resistant finish.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: NEWSWAN Brand: NEWSWAN Model: NTMI-002

Features Wide measuring range0.05 to 60m High accuracy Quick measurement of distance, area and volume Automaticcalculationof area and volume Indirect measurement by Pythagorean Theorem Continuous measurement Min/Max distance tracking Easy addition/subtractionof measurement Switchable among metre(m), inch (in), feet (ft) Easy targeting withbright laser pointer Large LCD withbacklight Display illumination and multi-line display 100 data records Self calibation: -9mm to +9mm Bubble levelequipped as a spirit level tool Auto correction and error report technology Low battery indication Auto / manual power off function Specifications Measuring range: 0.05 to 60m (0.16 to 196ft) Accuracy:±2mm(±0.08 inch) Laser class: Class II Laser type: 635nm,